[Wed Aug 15 07:57:44 2012] Detection parameters:
  Position = (284.2, 245.0) = 12 5 9.11 35 16 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 8.3
  Background counts = 6.0
  Rate = 0.008 +/- 0.002

[Wed Aug 15 07:57:44 2012] Off-axis axis estimate = 4.01'
[Wed Aug 15 08:25:55 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 08:25:55 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Wed Aug 15 08:25:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841
[Wed Aug 15 08:25:55 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.43"
[Wed Aug 15 08:39:44 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 08:39:44 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 08:39:44 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 08:39:44 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 08:39:44 2012] Fit fullrun_mos1_xmm0148740301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 15 08:55:10 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.551780 pixels away
[Wed Aug 15 08:55:10 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 08:55:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 08:55:10 2012] Assessing source extent using major
[Wed Aug 15 08:55:10 2012] Source does appear to be extended
[Wed Aug 15 08:55:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 09:19:50 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 09:19:50 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Wed Aug 15 09:19:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841
[Wed Aug 15 09:19:50 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.43"
[Wed Aug 15 09:33:14 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 09:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 09:33:14 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 09:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 09:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 09:33:14 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 09:33:14 2012] fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 09:33:14 2012] Fit fullrun_mos1_xmm0148740301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 09:48:30 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.551780 pixels away
[Wed Aug 15 09:48:30 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 09:48:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 09:48:30 2012] Assessing source extent using major
[Wed Aug 15 09:48:30 2012] Source does appear to be extended
[Wed Aug 15 09:48:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:08:50 2012] XMMSAS src. selection expression = ellipse(24678.435669, 21266.513275, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 10:08:50 2012] Writing source region out to fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10_src.reg
[Wed Aug 15 10:08:50 2012] Extracting stamp from image fullrun_mos1_xmm0148740301_pi300-10000_cl_sm2.00.img.gz, (247, 208) - (322, 283)
[Wed Aug 15 10:08:50 2012] XMMSAS bgd. selection expression = annulus(24678.435669, 21266.513275, 1087.500000, 2175.000000, X, Y)
[Wed Aug 15 10:08:50 2012] Writing fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10.gif
[Wed Aug 15 10:10:12 2012] Mean detx,y = (-4518.18, -5079.69) 
[Wed Aug 15 10:10:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 10:10:47 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 10:10:48 2012] Setting source spectrum file to fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug 15 10:10:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Aug 15 10:13:22 2012] Not generating rmf since there are only 39 counts
[Wed Aug 15 10:13:22 2012] rmf not generated due to insufficient counts
[Wed Aug 15 10:18:37 2012] Updating aperture counts using extracted products
[Wed Aug 15 10:18:37 2012] Error reading totcts from fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug 15 10:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 10:18:37 2012] Using photon index=1.80, rate=0.00768, arf fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10.arf
[Wed Aug 15 10:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 10:18:37 2012] Updating source flux to 1.1e-13
[Wed Aug 15 10:18:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 15 10:18:41 2012] xmm0148740301/analysis//spectral/fullrun_mos1_xmm0148740301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete