[Wed May 30 21:18:35 2012] Detection parameters:
  Position = (320.3, 317.0) = 13 11 48.14 27 52 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 15.0
  Background counts = 36.7
  Rate = 0.001 +/- 0.0003

[Wed May 30 21:18:35 2012] Off-axis axis estimate = 2.08'
[Wed May 30 23:00:33 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:00:33 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 30 23:00:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Wed May 30 23:00:33 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.47"
[Wed May 30 23:39:50 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22.ximg exists
[Wed May 30 23:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22.csv
[Wed May 30 23:39:50 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May 30 23:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22.csv
[Wed May 30 23:39:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:39:51 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May 30 23:39:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May 30 23:39:51 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May 30 23:39:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May 30 23:39:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:40:11 2012] Source 22 is offset by 7.133721 and -0.610744 pixels which is larger than
2 X fitted extent = 6.860414 x 6.860414, not incorporating fit results
[Wed May 30 23:40:11 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:40:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:40:11 2012] Assessing source extent using major
[Wed May 30 23:40:11 2012] Source does appear to be extended
[Wed May 30 23:40:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:59:38 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Thu May 31 00:59:38 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Thu May 31 00:59:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Thu May 31 00:59:38 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.47"
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src21.ximg exists
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May 31 01:33:38 2012] Fit fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src21 appears to have run properly
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May 31 01:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May 31 01:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 31 01:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 01:33:56 2012] Spatial fit model total counts = 750.552000, observed total counts = 692.000000
[Thu May 31 01:33:56 2012] Offset between fit and detection position for source 22 = 0.557328 pixels
[Thu May 31 01:33:56 2012] 721.560600 total counts/ 702.730000 bgd. counts: snr = 0.710346
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.557328 pixels
  Position = (320.0, 317.5) = 13 11 48.23 27 52 34.0
  Extent = 2.5" x 1.1", rotation angle = 357
  Source counts = 18.8 +/- 26.9
  Background counts = 702.7
  Rate = 0.0003 +/- 0.0005
  Deleting source due to low Poisson probability