[Wed May 30 21:18:34 2012] Detection parameters:
  Position = (307.7, 319.8) = 13 11 52.25 27 52 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8990.6 +/- 111.7
  Background counts = 36.1
  Rate = 0.2 +/- 0.002

[Wed May 30 21:18:35 2012] Off-axis axis estimate = 1.69'
[Wed May 30 23:00:33 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:00:33 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed May 30 23:00:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed May 30 23:00:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed May 30 23:39:50 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 23:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:39:50 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 23:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:39:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:39:51 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 23:39:51 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 23:39:51 2012] Fit fullrun_mos2_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 23:40:11 2012] Spatial fit model total counts = 8380.070000, observed total counts = 8007.000000
[Wed May 30 23:40:11 2012] Offset between fit and detection position for source 2 = 0.246015 pixels
[Wed May 30 23:40:11 2012] 8388.220000 total counts/ 2279.720000 bgd. counts: snr = 127.936311
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.246015 pixels
  Position = (307.5, 319.7) = 13 11 52.31 27 52 43.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 6108.5 +/- 91.6
  Background counts = 2279.7
  Rate = 0.1 +/- 0.002
[Wed May 30 23:40:11 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:40:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:40:11 2012] Assessing source extent using major axis lower bound
[Wed May 30 23:40:11 2012] Source does appear to be extended
[Wed May 30 23:40:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 00:59:38 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Thu May 31 00:59:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.721
[Thu May 31 00:59:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.51"
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 01:33:38 2012] Fit fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 01:33:38 2012] fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 01:33:38 2012] Fit fullrun_mos2_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 01:33:56 2012] Spatial fit model total counts = 8413.500000, observed total counts = 8045.000000
[Thu May 31 01:33:56 2012] Offset between fit and detection position for source 2 = 0.021408 pixels
[Thu May 31 01:33:56 2012] 8509.240000 total counts/ 2419.310000 bgd. counts: snr = 123.813084
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021408 pixels
  Position = (307.5, 319.7) = 13 11 52.32 27 52 43.3
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 6089.9 +/- 92.2
  Background counts = 2419.3
  Rate = 0.1 +/- 0.002
[Thu May 31 01:33:56 2012] Vigneting correction estimate = 1.000000
[Thu May 31 01:33:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 01:33:56 2012] Assessing source extent using major axis lower bound
[Thu May 31 01:33:56 2012] Source does appear to be extended
[Thu May 31 01:33:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 03:10:06 2012] Counts = 6089.930000, rescaling region sizes by 2.000000
[Thu May 31 03:10:06 2012] XMMSAS src. selection expression = ellipse(26706.141600, 27761.723000, 656.400019, 656.400019, 0.000000, X, Y)
[Thu May 31 03:10:06 2012] Writing source region out to fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 03:10:06 2012] Extracting stamp from image fullrun_mos2_xmm0148680101_pi300-10000_cl_sm2.00.img.gz, (270, 282) - (345, 357)
[Thu May 31 03:10:06 2012] XMMSAS bgd. selection expression = annulus(26706.141600, 27761.723000, 2188.000063, 4376.000126, X, Y) && !ellipse(28731.584780, 24118.605400, 392.535211, 392.535211, 0.000000, X, Y) && !ellipse(27999.752200, 31940.549000, 352.469610, 352.469610, 0.000000, X, Y) && !ellipse(23648.186200, 24348.968800, 338.510410, 338.510410, 0.000000, X, Y) && !ellipse(29822.219400, 32147.591200, 390.016011, 390.016011, 0.000000, X, Y) && !ellipse(31960.048600, 23819.423000, 1185.952034, 452.080013, 104.637500, X, Y)
[Thu May 31 03:10:06 2012] Writing fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2.gif
[Thu May 31 03:10:09 2012] Mean detx,y = (-11.40, -24.07) 
[Thu May 31 03:10:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 03:10:19 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 03:10:19 2012] Setting source spectrum file to fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 03:10:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 03:29:06 2012] Updating aperture counts using extracted products
[Thu May 31 03:29:06 2012] Error reading totcts from fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 03:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 03:29:06 2012] Using photon index=1.80, rate=0.102, arf fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 03:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 03:29:06 2012] Updating source flux to 1.3e-12
[Thu May 31 03:31:27 2012] Reading fit data from xmm0148680101/analysis//spectral/fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 31 03:31:27 2012] Spectral fit parameter nH value = 9.28142e+21
[Thu May 31 03:31:27 2012] Spectral fit parameter PhoIndex value = 9.995
[Thu May 31 03:31:27 2012] Failed to get F(0.3-8.0) from xmm0148680101/analysis//spectral/fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 31 03:31:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 03:31:27 2012] Using Nh = 9.3e+21, photon index=9.99, rate=0.102, arf fullrun_mos2_xmm0148680101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 03:31:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 03:31:27 2012] Updating source flux to 7.9e-13