[Wed May 30 21:18:09 2012] Detection parameters:
  Position = (183.9, 172.7) = 13 12 32.81 27 42 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.1 +/- 21.3
  Background counts = 23.6
  Rate = 0.004 +/- 0.0003

[Wed May 30 21:18:10 2012] Off-axis axis estimate = 12.33'
[Wed May 30 22:20:53 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:20:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 22:20:53 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Wed May 30 22:20:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Wed May 30 22:20:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.59"
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5.csv
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5.csv
[Wed May 30 23:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 30 23:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:40:07 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.038102 pixels away
[Wed May 30 23:40:07 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:40:07 2012] Assessing source extent using major
[Wed May 30 23:40:07 2012] Source does appear to be extended
[Wed May 30 23:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:28:47 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Thu May 31 00:28:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 00:28:47 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Thu May 31 00:28:47 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Thu May 31 00:28:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.59"
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5.csv
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5.csv
[Thu May 31 00:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 00:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 01:33:52 2012] Source 4 is offset by 6.268980 and -6.618971 pixels which is larger than
2 X fitted extent = 0.733559 x 0.733559, not incorporating fit results
[Thu May 31 01:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 31 01:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 01:33:52 2012] Assessing source extent using major
[Thu May 31 01:33:52 2012] Source does appear to be extended
[Thu May 31 01:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 02:44:56 2012] XMMSAS src. selection expression = ellipse(15950.843277, 14980.707520, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 02:44:56 2012] Writing source region out to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 02:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0148680101_pi300-10000_cl_sm2.00.img.gz, (146, 135) - (221, 210)
[Thu May 31 02:44:56 2012] XMMSAS bgd. selection expression = annulus(15950.843277, 14980.707520, 1087.500000, 2175.000000, X, Y)
[Thu May 31 02:44:56 2012] Writing fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4.gif
[Thu May 31 02:46:04 2012] Mean detx,y = (-9582.44, -13683.75) 
[Thu May 31 02:46:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 02:46:16 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 02:46:16 2012] Setting source spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 02:46:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 02:58:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 02:58:41 2012] rmf not generated due to insufficient counts
[Thu May 31 03:29:05 2012] Updating aperture counts using extracted products
[Thu May 31 03:29:05 2012] Error reading totcts from fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 03:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 03:29:05 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src4.arf
[Thu May 31 03:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 03:29:05 2012] Updating source flux to 1.7e-13
[Thu May 31 03:29:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting