[Wed May 30 21:18:09 2012] Detection parameters:
  Position = (330.9, 277.9) = 13 11 44.67 27 49 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 850.7 +/- 36.2
  Background counts = 35.0
  Rate = 0.02 +/- 0.0007

[Wed May 30 21:18:10 2012] Off-axis axis estimate = 2.78'
[Wed May 30 22:20:53 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:20:53 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed May 30 22:20:53 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Wed May 30 22:20:53 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.82"
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 30 23:00:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2.csv
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 30 23:00:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2.csv
[Wed May 30 23:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 30 23:00:32 2012] Fit fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 30 23:40:07 2012] Spatial fit model total counts = 942.568000, observed total counts = 944.000000
[Wed May 30 23:40:07 2012] Offset between fit and detection position for source 2 = 0.099439 pixels
[Wed May 30 23:40:07 2012] 940.767000 total counts/ 389.588000 bgd. counts: snr = 27.924787
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.099439 pixels
  Position = (330.9, 277.8) = 13 11 44.65 27 49 41.3
  Extent = 5.0 (4.7-5.4)", rotation angle = 0
  Source counts = 551.2 +/- 30.7
  Background counts = 389.6
  Rate = 0.009 +/- 0.0005
[Wed May 30 23:40:07 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:40:07 2012] Assessing source extent using major axis lower bound
[Wed May 30 23:40:07 2012] Source does appear to be extended
[Wed May 30 23:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:28:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 00:28:47 2012] Initial guess for spatial extent in simple fitting = 5.03"
[Thu May 31 00:28:47 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.095
[Thu May 31 00:28:47 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.03"
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2.csv
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2.csv
[Thu May 31 00:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 31 00:59:38 2012] Fit fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 31 01:33:52 2012] Spatial fit model total counts = 943.308000, observed total counts = 944.000000
[Thu May 31 01:33:52 2012] Offset between fit and detection position for source 2 = 0.000263 pixels
[Thu May 31 01:33:52 2012] 941.500000 total counts/ 390.041000 bgd. counts: snr = 27.922744
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000263 pixels
  Position = (330.9, 277.8) = 13 11 44.65 27 49 41.3
  Extent = 5.0 (4.7-5.4)", rotation angle = 0
  Source counts = 551.5 +/- 30.7
  Background counts = 390.0
  Rate = 0.009 +/- 0.0005
[Thu May 31 01:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 31 01:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 01:33:52 2012] Assessing source extent using major axis lower bound
[Thu May 31 01:33:52 2012] Source does appear to be extended
[Thu May 31 01:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 02:44:56 2012] XMMSAS src. selection expression = ellipse(28740.723300, 24121.199800, 301.003209, 301.003209, 0.000000, X, Y)
[Thu May 31 02:44:56 2012] Writing source region out to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 02:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0148680101_pi300-10000_cl_sm2.00.img.gz, (314, 261) - (348, 295)
[Thu May 31 02:44:56 2012] XMMSAS bgd. selection expression = annulus(28740.723300, 24121.199800, 501.672014, 1003.344029, X, Y)
[Thu May 31 02:44:56 2012] Writing fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2.gif
[Thu May 31 02:45:22 2012] Mean detx,y = (-3835.94, 935.95) 
[Thu May 31 02:45:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 02:45:30 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 02:45:30 2012] Setting source spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 02:45:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 03:29:05 2012] Updating aperture counts using extracted products
[Thu May 31 03:29:05 2012] Error reading totcts from fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 03:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 03:29:05 2012] Using photon index=1.80, rate=0.00939, arf fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 03:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 03:29:05 2012] Updating source flux to 1.5e-13