[Wed May 30 21:18:10 2012] Detection parameters:
  Position = (140.6, 314.2) = 13 12 47.08 27 52 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.2 +/- 15.7
  Background counts = 28.0
  Rate = 0.002 +/- 0.0003

[Wed May 30 21:18:10 2012] Off-axis axis estimate = 11.50'
[Wed May 30 22:20:53 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:20:53 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed May 30 22:20:53 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.125
[Wed May 30 22:20:53 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.18"
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15.csv
[Wed May 30 23:00:32 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 30 23:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15.csv
[Wed May 30 23:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:00:33 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 30 23:00:33 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 30 23:00:33 2012] Fit fullrun_mos1_xmm0148680101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May 30 23:40:07 2012] Spatial fit model total counts = 408.406000, observed total counts = 369.000000
[Wed May 30 23:40:07 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 23:40:07 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:40:07 2012] Assessing source extent using major
[Wed May 30 23:40:07 2012] Source does appear to be extended
[Wed May 30 23:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:28:47 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu May 31 00:28:47 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Thu May 31 00:28:47 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.125
[Thu May 31 00:28:47 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.18"
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15.csv
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May 31 00:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15.csv
[Thu May 31 00:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May 31 00:59:38 2012] fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May 31 00:59:38 2012] Fit fullrun_mos1_xmm0148680101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu May 31 01:33:52 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.005447 pixels away
[Thu May 31 01:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 31 01:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 01:33:52 2012] Assessing source extent using major
[Thu May 31 01:33:52 2012] Source does appear to be extended
[Thu May 31 01:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 02:44:56 2012] XMMSAS src. selection expression = ellipse(12182.820389, 27289.277313, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 02:44:56 2012] Writing source region out to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12_src.reg
[Thu May 31 02:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0148680101_pi300-10000_cl_sm2.00.img.gz, (103, 277) - (178, 352)
[Thu May 31 02:44:56 2012] XMMSAS bgd. selection expression = annulus(12182.820389, 27289.277313, 1087.500000, 2175.000000, X, Y) && !ellipse(14165.410496, 26902.834954, 771.251377, 343.549943, 85.990746, X, Y)
[Thu May 31 02:44:56 2012] Writing fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12.gif
[Thu May 31 02:48:30 2012] Mean detx,y = (3257.40, -14331.47) 
[Thu May 31 02:48:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 02:48:37 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 02:48:37 2012] Setting source spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May 31 02:48:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu May 31 03:08:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 03:08:59 2012] rmf not generated due to insufficient counts
[Thu May 31 03:29:05 2012] Updating aperture counts using extracted products
[Thu May 31 03:29:05 2012] Error reading totcts from fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May 31 03:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 03:29:05 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos1_xmm0148680101_pi300-10000_pass1_cl_src12.arf
[Thu May 31 03:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 03:29:05 2012] Updating source flux to 7.1e-14
[Thu May 31 03:29:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting