[Mon May 21 04:05:46 2012] Detection parameters:
  Position = (420.7, 275.9) = 5 41 32.24 60 51 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.8 +/- 16.4
  Background counts = 34.3
  Rate = 0.01 +/- 0.001

[Mon May 21 04:05:47 2012] Off-axis axis estimate = 9.02'
[Mon May 21 04:07:05 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:07:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 04:07:05 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Mon May 21 04:07:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Mon May 21 04:07:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.94"
[Mon May 21 04:15:47 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 21 04:15:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 04:15:47 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 21 04:15:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 04:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 04:15:47 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 21 04:15:47 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 21 04:15:47 2012] Fit fullrun_mos1_xmm0148590801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 21 04:23:58 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.609507 pixels away
[Mon May 21 04:23:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 04:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 04:23:58 2012] Assessing source extent using major
[Mon May 21 04:23:58 2012] Source does appear to be extended
[Mon May 21 04:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 04:24:04 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:24:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 04:24:04 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Mon May 21 04:24:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Mon May 21 04:24:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.94"
[Mon May 21 04:29:21 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 21 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 04:29:21 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 21 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 04:29:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 04:29:21 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 21 04:29:21 2012] fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 21 04:29:21 2012] Fit fullrun_mos1_xmm0148590801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 21 04:36:07 2012] Spatial fit model total counts = 432.662000, observed total counts = 432.000000
[Mon May 21 04:36:07 2012] Offset between fit and detection position for source 1 = 0.261734 pixels
[Mon May 21 04:36:07 2012] 429.471000 total counts/ 326.855000 bgd. counts: snr = 5.675936
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.261734 pixels
  Position = (420.5, 275.9) = 5 41 32.40 60 51 27.8
  Extent = 6.5 (4.9-8.8)", rotation angle = 0
  Source counts = 102.6 +/- 20.7
  Background counts = 326.9
  Rate = 0.008 +/- 0.002
[Mon May 21 04:36:07 2012] Vigneting correction estimate = 1.000000
[Mon May 21 04:36:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 04:36:07 2012] Assessing source extent using major axis lower bound
[Mon May 21 04:36:07 2012] Source does appear to be extended
[Mon May 21 04:36:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 04:36:13 2012] XMMSAS src. selection expression = ellipse(36533.299200, 23951.448060, 388.752011, 388.752011, 0.000000, X, Y)
[Mon May 21 04:36:13 2012] Writing source region out to fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 04:36:13 2012] Extracting stamp from image fullrun_mos1_xmm0148590801_pi300-10000_cl_sm2.00.img.gz, (398, 254) - (443, 298)
[Mon May 21 04:36:13 2012] XMMSAS bgd. selection expression = annulus(36533.299200, 23951.448060, 647.920019, 1295.840037, X, Y)
[Mon May 21 04:36:13 2012] Writing fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1.gif
[Mon May 21 04:36:17 2012] Mean detx,y = (4277.88, -10542.61) 
[Mon May 21 04:36:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 04:36:33 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 04:36:34 2012] Setting source spectrum file to fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 04:36:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 04:45:39 2012] Updating aperture counts using extracted products
[Mon May 21 04:45:39 2012] Error reading totcts from fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 04:45:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 04:45:39 2012] Using photon index=1.80, rate=0.00818, arf fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 04:45:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 04:45:39 2012] Updating source flux to 2e-13
[Mon May 21 04:45:51 2012] Reading fit data from xmm0148590801/analysis//spectral/fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 04:45:51 2012] Spectral fit parameter nH value = 2.56428e+21
[Mon May 21 04:45:51 2012] Spectral fit parameter PhoIndex value = 2.036
[Mon May 21 04:45:51 2012] Failed to get F(0.3-8.0) from xmm0148590801/analysis//spectral/fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 04:45:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 04:45:51 2012] Using Nh = 2.6e+21, photon index=2.04, rate=0.00818, arf fullrun_mos1_xmm0148590801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 04:45:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 04:45:51 2012] Updating source flux to 2.2e-13