[Mon May 27 01:09:55 2013] Detection parameters:
  Position = (376.5, 358.1) = 14 49 6.52 9 2 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 10.7
  Background counts = 13.4
  Rate = 0.003 +/- 0.0004

[Mon May 27 01:09:56 2013] Off-axis axis estimate = 7.12'
[Mon May 27 03:03:22 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon May 27 03:03:22 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Mon May 27 03:03:22 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.927
[Mon May 27 03:03:22 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.99"
[Mon May 27 04:09:13 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20.ximg exists
[Mon May 27 04:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20.csv
[Mon May 27 04:09:13 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May 27 04:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20.csv
[Mon May 27 04:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:09:13 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May 27 04:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 27 04:09:13 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May 27 04:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 27 04:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148520301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:14:25 2013] Source 18 is offset by 9.173100 and -2.781647 pixels which is larger than
2 X fitted extent = 1.172975 x 1.172975, not incorporating fit results
[Mon May 27 05:14:25 2013] Vigneting correction estimate = 1.000000
[Mon May 27 05:14:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 05:14:25 2013] Assessing source extent using major
[Mon May 27 05:14:25 2013] Source does appear to be extended
[Mon May 27 05:14:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 06:51:31 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon May 27 06:51:31 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Mon May 27 06:51:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.927
[Mon May 27 06:51:31 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.99"
[Mon May 27 07:50:03 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 27 07:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20.csv
[Mon May 27 07:50:03 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 27 07:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20.csv
[Mon May 27 07:50:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:50:03 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 27 07:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 27 07:50:03 2013] fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 27 07:50:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 27 07:50:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148520301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:40:43 2013] Spatial fit model total counts = 195.101000, observed total counts = 162.000000
[Mon May 27 08:40:43 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:40:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:40:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:40:43 2013] Assessing source extent using major
[Mon May 27 08:40:43 2013] Source does appear to be extended
[Mon May 27 08:40:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 10:17:29 2013] XMMSAS src. selection expression = ellipse(32702.961700, 31108.234283, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 10:17:29 2013] Writing source region out to fullrun_mos1_xmm0148520301_pi300-10000_pass1_cl_src18_src.reg
[Mon May 27 10:17:29 2013] Extracting stamp from image fullrun_mos1_xmm0148520301_pi300-10000_cl_sm2.00.img.gz, (339, 321) - (414, 396)
[Mon May 27 10:17:29 2013] XMMSAS bgd. selection expression = annulus(32702.961700, 31108.234283, 1087.500000, 2175.000000, X, Y) && !ellipse(33287.037380, 32328.453000, 710.566420, 209.813606, 32.247800, X, Y)
[Mon May 27 10:17:29 2013] Writing fullrun_mos1_xmm0148520301_pi300-10000_pass1_cl_src18.gif
[Mon May 27 10:25:43 2013] Mean detx,y = (896.09, 6875.19) 
[Mon May 27 10:25:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 10:26:17 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 10:26:18 2013] Setting source spectrum file to fullrun_mos1_xmm0148520301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 27 10:26:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0148520301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 27 10:49:04 2013] Not generating rmf since there are only 65 counts
[Mon May 27 10:49:04 2013] rmf not generated due to insufficient counts