[Thu May 2 08:49:43 2013] Detection parameters: Position = (333.0, 337.1) = 23 36 26.28 21 10 52.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.1 +/- 26.3 Background counts = 259.5 Rate = 0.006 +/- 0.0009 [Thu May 2 08:49:43 2013] Off-axis axis estimate = 3.76' [Thu May 2 08:50:15 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting [Thu May 2 08:50:15 2013] Initial guess for spatial extent in simple fitting = 8.31" [Thu May 2 08:50:15 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861 [Thu May 2 08:50:15 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.31" [Thu May 2 08:50:16 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24.ximg exists [Thu May 2 08:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24.csv [Thu May 2 08:50:16 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24_1.ximg exists [Thu May 2 08:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24.csv [Thu May 2 08:50:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 08:50:17 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Thu May 2 08:50:17 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Thu May 2 08:50:17 2013] Fit fullrun_pn_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Thu May 2 08:50:31 2013] Source 25 is offset by 5.486575 and 3.153210 pixels which is larger than 2 X fitted extent = 0.945457 x 0.945457, not incorporating fit results [Thu May 2 08:50:31 2013] Warning, spatial fit 24 centroid is now closest to src. 24 [Thu May 2 08:50:31 2013] Vigneting correction estimate = 1.000000 [Thu May 2 08:50:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 08:50:31 2013] Assessing source extent using major [Thu May 2 08:50:31 2013] Source does appear to be extended [Thu May 2 08:50:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 08:50:31 2013] Source is confused with source 24 [Thu May 2 08:50:57 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting [Thu May 2 08:50:57 2013] Initial guess for spatial extent in simple fitting = 8.31" [Thu May 2 08:50:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861 [Thu May 2 08:50:57 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.31" [Thu May 2 08:50:59 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_src17.ximg exists [Thu May 2 08:50:59 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_src17_1.ximg exists [Thu May 2 08:50:59 2013] Fit fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_src17 appears to have run properly [Thu May 2 08:50:59 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Thu May 2 08:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17.csv [Thu May 2 08:50:59 2013] fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Thu May 2 08:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17.csv [Thu May 2 08:50:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0148310101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 08:51:08 2013] Spatial fit model total counts = 11569.400000, observed total counts = 10134.000000 [Thu May 2 08:51:08 2013] Poor agreement between spatial fit and data for source 25 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 08:51:08 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 14.571118 pixels away [Thu May 2 08:51:08 2013] Vigneting correction estimate = 1.000000 [Thu May 2 08:51:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 08:51:08 2013] Assessing source extent using major [Thu May 2 08:51:08 2013] Source does appear to be extended [Thu May 2 08:51:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 08:51:29 2013] XMMSAS src. selection expression = ellipse(28920.976013, 29278.571289, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 08:51:29 2013] Not overwriting source region fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_src.reg [Thu May 2 08:51:29 2013] Extracting stamp from image fullrun_pn_xmm0148310101_pi300-10000_cl_sm2.00.img.gz, (295, 300) - (370, 375) [Thu May 2 08:51:29 2013] XMMSAS bgd. selection expression = annulus(28920.976013, 29278.571289, 1087.500000, 2175.000000, X, Y) && !ellipse(27789.346900, 26792.985800, 3506.256101, 3506.256101, 0.000000, X, Y) && !ellipse(27545.896515, 28420.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.980865, 28051.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29471.212000, 27208.850000, 730.853621, 730.853621, 0.000000, X, Y) && !ellipse(28298.064000, 28917.370000, 1329.264038, 1329.264038, 0.000000, X, Y) && !ellipse(26857.752747, 29173.617981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29282.421082, 28121.087372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.778000, 27929.563000, 1296.904037, 1296.904037, 89.612000, X, Y) [Thu May 2 08:51:29 2013] Writing fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25.gif [Thu May 2 08:59:21 2013] Mean detx,y = (78.02, -2801.21) [Thu May 2 08:59:23 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 08:59:39 2013] Binned source spectrum to 10 counts/bin [Thu May 2 08:59:39 2013] Setting source spectrum file to fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Thu May 2 08:59:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_bgd.pi.gz [Thu May 2 09:12:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 09:12:16 2013] rmf not generated due to insufficient counts [Thu May 2 09:20:57 2013] Updating aperture counts using extracted products [Thu May 2 09:20:57 2013] Total counts from fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 2283.00 [Thu May 2 09:20:57 2013] Total counts from fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 3928.00 [Thu May 2 09:20:57 2013] Got source and background scale factors 1119873.000000, 4171286.000000 [Thu May 2 09:20:57 2013] User source parameters: Position = (333.0, 337.1) = 23 36 26.28 21 10 52.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1228.4 +/- 48.8 Background aperture counts = 1054.6 Rate = 0.03 +/- 0.001 [Thu May 2 09:20:57 2013] Updating counts from extracted products [Thu May 2 09:20:57 2013] Set source signif. to 1228.44/32.47 = 37.83 [Thu May 2 09:20:59 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 09:20:59 2013] Using photon index=1.80, rate=0.0326, arf fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25.arf [Thu May 2 09:20:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 09:20:59 2013] Updating source flux to 1.1e-13 [Thu May 2 09:21:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 09:21:09 2013] xmm0148310101/analysis//spectral/fullrun_pn_xmm0148310101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete