[Thu May  2 08:49:45 2013] Detection parameters:
  Position = (219.4, 287.9) = 23 37 1.59 21 7 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.7 +/- 8.9
  Background counts = 13.7
  Rate = 0.002 +/- 0.0004

[Thu May  2 08:49:45 2013] Off-axis axis estimate = 5.78'
[Thu May  2 08:50:18 2013] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu May  2 08:50:18 2013] Initial guess for spatial extent in simple fitting = 9.32"
[Thu May  2 08:50:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.003
[Thu May  2 08:50:18 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 9.32"
[Thu May  2 08:50:19 2013] fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39.ximg exists
[Thu May  2 08:50:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39.csv
[Thu May  2 08:50:19 2013] fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu May  2 08:50:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39.csv
[Thu May  2 08:50:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 08:50:20 2013] fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu May  2 08:50:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu May  2 08:50:20 2013] fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu May  2 08:50:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu May  2 08:50:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148310101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 08:50:39 2013] Spatial fit model total counts = 160.594000, observed total counts = 138.000000
[Thu May  2 08:50:39 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 08:50:39 2013] Vigneting correction estimate = 1.000000
[Thu May  2 08:50:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 08:50:39 2013] Assessing source extent using major
[Thu May  2 08:50:39 2013] Source does appear to be extended
[Thu May  2 08:50:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 08:50:39 2013] Deleting source due to low Poisson probability 0.9