[Thu Oct  6 02:06:11 2011] Detection parameters:
  Position = (305.5, 284.0) = 14 16 24.69 23 16 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.7 +/- 19.6
  Background counts = 15.1
  Rate = 0.05 +/- 0.004

[Thu Oct  6 02:06:12 2011] Off-axis axis estimate = 1.17'
[Thu Oct  6 02:08:30 2011] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:08:30 2011] Initial guess for spatial extent in simple fitting = 7.01"
[Thu Oct  6 02:08:30 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.121
[Thu Oct  6 02:08:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.01"
[Thu Oct  6 03:15:35 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Oct  6 03:15:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 03:15:35 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Oct  6 03:15:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 03:15:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:15:36 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 03:15:36 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 03:15:36 2011] Fit fullrun_pn_xmm0148250201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 05:01:19 2011] Spatial fit model total counts = 526.109000, observed total counts = 525.000000
[Thu Oct  6 05:01:19 2011] Offset between fit and detection position for source 1 = 0.031570 pixels
[Thu Oct  6 05:01:19 2011] 512.424000 total counts/ 383.865000 bgd. counts: snr = 6.561653
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031570 pixels
  Position = (305.5, 283.9) = 14 16 24.70 23 16 13.7
  Extent = 5.7 (4.6-6.7)", rotation angle = 0
  Source counts = 128.6 +/- 22.6
  Background counts = 383.9
  Rate = 0.03 +/- 0.005
[Thu Oct  6 05:01:19 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 05:01:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 05:01:19 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 05:01:19 2011] Source does appear to be extended
[Thu Oct  6 05:01:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:01:19 2011] Source is confused with source 17
[Thu Oct  6 05:01:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 05:01:42 2011] Initial guess for spatial extent in simple fitting = 5.67"
[Thu Oct  6 05:01:42 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.922
[Thu Oct  6 05:01:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.67"
[Thu Oct  6 06:12:47 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Oct  6 06:12:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 06:12:47 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Oct  6 06:12:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 06:12:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:12:48 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 06:12:48 2011] fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 06:12:48 2011] Fit fullrun_pn_xmm0148250201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 07:45:00 2011] Spatial fit model total counts = 525.434000, observed total counts = 525.000000
[Thu Oct  6 07:45:00 2011] Offset between fit and detection position for source 1 = 0.006496 pixels
[Thu Oct  6 07:45:00 2011] 511.719000 total counts/ 387.563000 bgd. counts: snr = 6.306618
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006496 pixels
  Position = (305.5, 283.9) = 14 16 24.69 23 16 13.7
  Extent = 5.5 (4.6-7.0)", rotation angle = 0
  Source counts = 124.2 +/- 22.6
  Background counts = 387.6
  Rate = 0.03 +/- 0.005
[Thu Oct  6 07:45:00 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 07:45:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 07:45:00 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 07:45:00 2011] Source does appear to be extended
[Thu Oct  6 07:45:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 07:45:13 2011] XMMSAS src. selection expression = ellipse(26531.789600, 24653.649000, 329.321409, 329.321409, 0.000000, X, Y)
[Thu Oct  6 07:45:13 2011] Writing source region out to fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_src.reg
[Thu Oct  6 07:45:13 2011] Extracting stamp from image fullrun_pn_xmm0148250201_pi300-10000_cl_sm2.00.img.gz, (287, 265) - (324, 303)
[Thu Oct  6 07:45:13 2011] XMMSAS bgd. selection expression = annulus(26531.789600, 24653.649000, 548.869016, 1097.738032, X, Y) && !ellipse(25868.630600, 23602.939000, 1218.904035, 1218.904035, 0.000000, X, Y) && !ellipse(25479.602200, 24480.174200, 619.588818, 619.588818, 0.000000, X, Y) && !ellipse(25277.096985, 25228.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24651.450080, 25037.060800, 838.088024, 838.088024, 0.000000, X, Y) && !ellipse(25983.401154, 24974.253723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25237.620000, 23773.160000, 1171.048034, 1171.048034, 0.000000, X, Y)
[Thu Oct  6 07:45:13 2011] Writing fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1.gif
[Thu Oct  6 07:45:16 2011] Mean detx,y = (-874.98, 84.08) 
[Thu Oct  6 07:45:19 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 07:45:32 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 07:45:32 2011] Setting source spectrum file to fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 07:45:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Oct  6 08:46:58 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:46:58 2011] Error reading totcts from fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 08:46:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:46:58 2011] Using photon index=1.80, rate=0.0254, arf fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 08:46:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 08:46:59 2011] Updating source flux to 8.1e-14
[Thu Oct  6 08:47:20 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Oct  6 08:47:30 2011] Reading fit data from xmm0148250201/analysis//spectral/fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Oct  6 08:47:30 2011] Spectral fit parameter nH value = 5.81616e+20
[Thu Oct  6 08:47:30 2011] Spectral fit parameter PhoIndex value = 1.95707
[Thu Oct  6 08:47:30 2011] Failed to get F(0.3-8.0) from xmm0148250201/analysis//spectral/fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 08:47:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:47:30 2011] Using Nh = 5.8e+20, photon index=1.96, rate=0.0254, arf fullrun_pn_xmm0148250201_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 08:47:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 08:47:30 2011] Updating source flux to 8.4e-14