[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (320.2, 116.1) = 17 2 35.76 -48 59 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.1 +/- 24.1
  Background counts = 22.6
  Rate = 0.01 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 13.31'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Dec 20 12:51:33 2011] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.955
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 13.09"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Dec 20 15:51:24 2011] Source 9 is offset by -8.386870 and 1.612346 pixels which is larger than
2 X fitted extent = 1.538915 x 1.538915, not incorporating fit results
[Tue Dec 20 15:51:24 2011] Warning, spatial fit 19 centroid is now closest to src. 3
[Tue Dec 20 15:51:24 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.771366 pixels away
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:53:40 2011] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Dec 20 18:53:40 2011] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.955
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 13.09"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18.csv
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18.csv
[Tue Dec 20 22:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Dec 20 22:32:03 2011] Spatial fit model total counts = 829.372000, observed total counts = 830.000000
[Tue Dec 20 22:32:03 2011] Offset between fit and detection position for source 9 = 2.303520 pixels
[Tue Dec 20 22:32:03 2011] Warning, changing simple spatial fit ID from 18 to 10
[Tue Dec 20 22:32:03 2011] 226.725900 total counts/ 140.106000 bgd. counts: snr = 7.317948
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.303520 pixels
  Position = (321.6, 114.3) = 17 2 35.14 -48 59 7.7
  Extent = 11.9 (8.2-14.5)", rotation angle = 0
  Source counts = 86.6 +/- 15.1
  Background counts = 140.1
  Rate = 0.007 +/- 0.001
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(27927.778000, 9892.836000, 712.452021, 712.452021, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (281, 73) - (363, 155)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(27927.778000, 9892.836000, 1187.420034, 2374.840068, X, Y) && !ellipse(27567.942000, 11110.722000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(27254.840000, 13242.268000, 1533.848044, 1533.848044, 0.000000, X, Y) && !ellipse(27583.210297, 10815.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.102200, 12554.736600, 619.088018, 619.088018, 0.000000, X, Y) && !ellipse(27856.298645, 9003.742073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.310669, 8487.123817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26796.222000, 12050.982000, 2011.896058, 2011.896058, 0.000000, X, Y) && !ellipse(28175.783630, 7916.056885, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9.gif
[Wed Dec 21 00:52:30 2011] Mean detx,y = (235.12, 14489.23) 
[Wed Dec 21 00:52:32 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:52:58 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:52:58 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Dec 21 00:52:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Dec 21 02:11:06 2011] Not generating rmf since there are only 86 counts
[Wed Dec 21 02:11:06 2011] rmf not generated due to insufficient counts
[Wed Dec 21 03:12:03 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:03 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Dec 21 03:12:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:05 2011] Using photon index=1.80, rate=0.00653, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src9.arf
[Wed Dec 21 03:12:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:05 2011] Updating source flux to 9.3e-13
[Wed Dec 21 03:21:22 2011] Flag b found in src. 9 procflags, skipping spectral fitting
[Wed Dec 21 03:21:22 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting