[Tue Dec 20 10:16:57 2011] Detection parameters:
  Position = (206.2, 247.3) = 17 3 25.97 -48 49 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 15.5
  Background counts = 77.5
  Rate = 0.007 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 7.64'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 10.25"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.103
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 10.25"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Dec 20 15:51:02 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Dec 20 15:51:24 2011] Source 32 is offset by 1.713400 and -8.129919 pixels which is larger than
2 X fitted extent = 1.191044 x 1.191044, not incorporating fit results
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 1048.580000, observed total counts = 1045.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 32 = 8.557951 pixels
[Tue Dec 20 15:51:24 2011] 1096.341000 total counts/ 715.223000 bgd. counts: snr = 14.250783
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 8.557951 pixels
  Position = (197.7, 247.5) = 17 3 29.74 -48 49 27.8
  Extent = 20.5 (20.5-41.0)", rotation angle = 0
  Source counts = 381.1 +/- 33.1
  Background counts = 715.2
  Rate = 0.03 +/- 0.002
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 20.50"
[Tue Dec 20 18:53:40 2011] source mask rpix=4.7, npix_max = 108, mask sum = 115, frac = 1.058
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 20.50"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src28.ximg exists
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Dec 20 22:31:38 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Dec 20 22:32:03 2011] Source 32 is offset by 6.257080 and -5.960501 pixels which is larger than
2 X fitted extent = 2.009044 x 2.009044, not incorporating fit results
[Tue Dec 20 22:32:03 2011] Spatial fit model total counts = 2553.940000, observed total counts = 2552.000000
[Tue Dec 20 22:32:03 2011] Offset between fit and detection position for source 32 = 5.026824 pixels
[Tue Dec 20 22:32:03 2011] 2540.320000 total counts/ 2422.180000 bgd. counts: snr = 2.400456
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 5.026824 pixels
  Position = (202.7, 247.7) = 17 3 27.53 -48 49 27.0
  Extent = 26.2 (14.9-41.0)" x 10.0 (6.4-15.2)", rotation angle = 180 (149-199) degrees
  Source counts = 118.1 +/- 50.4
  Background counts = 2422.2
  Rate = 0.009 +/- 0.004
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue Dec 20 22:32:03 2011] Source is confused with source 31
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(17587.112000, 21497.110200, 1571.712045, 602.622017, 180.182000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (112, 157) - (293, 338)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(17587.112000, 21497.110200, 2619.520075, 5239.040151, X, Y) && !ellipse(18127.226000, 24174.193000, 1591.984046, 199.576006, 251.620000, X, Y) && !ellipse(17842.592000, 24834.650000, 1591.120046, 1591.120046, 0.000000, X, Y) && !ellipse(18424.615200, 21916.775400, 620.645618, 620.645618, 0.000000, X, Y) && !ellipse(17040.942000, 25746.284000, 1591.120046, 1591.120046, 0.000000, X, Y) && !ellipse(18247.538000, 23077.864000, 685.152020, 685.152020, 0.000000, X, Y) && !ellipse(17521.388687, 25054.055939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18049.149200, 23300.052000, 1398.296040, 1398.296040, 0.000000, X, Y) && !ellipse(17978.572000, 23549.190000, 1344.808039, 1344.808039, 0.000000, X, Y) && !ellipse(17661.612400, 24190.978000, 1593.528046, 1593.528046, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32.gif
[Wed Dec 21 00:58:40 2011] Mean detx,y = (-7777.21, 1254.01) 
[Wed Dec 21 00:58:43 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:59:13 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:59:13 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Dec 21 00:59:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Dec 21 03:12:04 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:04 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Dec 21 03:12:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:06 2011] Using photon index=1.80, rate=0.00891, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src32.arf
[Wed Dec 21 03:12:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:06 2011] Updating source flux to 1.3e-13
[Wed Dec 21 03:21:22 2011] Flag b found in src. 32 procflags, skipping spectral fitting
[Wed Dec 21 03:21:22 2011] Flag c found in src. 32 procflags, skipping spectral fitting