[Tue Dec 20 10:16:57 2011] Detection parameters:
  Position = (195.5, 264.2) = 17 3 30.69 -48 48 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.5 +/- 15.8
  Background counts = 80.8
  Rate = 0.008 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 7.87'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 10.36"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 10.36"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Dec 20 15:51:02 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 893.759000, observed total counts = 950.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 29 = 5.933615 pixels
[Tue Dec 20 15:51:24 2011] Warning, changing simple spatial fit ID from 26 to 24
[Tue Dec 20 15:51:24 2011] 631.719026 total counts/ 631.719000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 5.933615 pixels
  Position = (201.0, 262.0) = 17 3 28.26 -48 48 24.6
  Extent = 19.6 (19.6-19.6)", rotation angle = 0
  Source counts = 0.0 +/- 25.1
  Background counts = 631.7
  Rate = 2e-09 +/- 0.002
  Deleting source due to low Poisson probability