[Tue Dec 20 10:16:57 2011] Detection parameters:
  Position = (210.4, 269.9) = 17 3 24.14 -48 47 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.0 +/- 14.2
  Background counts = 82.5
  Rate = 0.009 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 6.71'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.2, npix_max = 30, mask sum = 21, frac = 0.695
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 9.78"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Dec 20 15:51:02 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Dec 20 15:51:02 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 869.696000, observed total counts = 947.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 28 = 2.813805 pixels
[Tue Dec 20 15:51:24 2011] Warning, changing simple spatial fit ID from 24 to 21
[Tue Dec 20 15:51:24 2011] 581.249700 total counts/ 43.622700 bgd. counts: snr = 81.400074
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.813805 pixels
  Position = (208.0, 268.4) = 17 3 25.17 -48 47 56.9
  Extent = 17.5 (14.6-19.4)", rotation angle = 0
  Source counts = 537.6 +/- 24.1
  Background counts = 43.6
  Rate = 0.04 +/- 0.002
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 25
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 17.48"
[Tue Dec 20 18:53:40 2011] source mask rpix=4.0, npix_max = 81, mask sum = 69, frac = 0.845
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 17.48"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23.csv
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23.csv
[Tue Dec 20 22:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 23 centroid is now closest to src. 32
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(18049.149200, 23300.052000, 1048.722030, 1048.722030, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (148, 208) - (268, 329)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(18049.149200, 23300.052000, 1747.870050, 3495.740101, X, Y) && !ellipse(18127.226000, 24174.193000, 1591.984046, 199.576006, 251.620000, X, Y) && !ellipse(17842.592000, 24834.650000, 1591.120046, 1591.120046, 0.000000, X, Y) && !ellipse(18424.615200, 21916.775400, 620.645618, 620.645618, 0.000000, X, Y) && !ellipse(17040.942000, 25746.284000, 1591.120046, 1591.120046, 0.000000, X, Y) && !ellipse(18247.538000, 23077.864000, 685.152020, 685.152020, 0.000000, X, Y) && !ellipse(17521.388687, 25054.055939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17978.572000, 23549.190000, 1344.808039, 1344.808039, 0.000000, X, Y) && !ellipse(17661.612400, 24190.978000, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(17587.112000, 21497.110200, 2095.616060, 803.496023, 180.182000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28.gif
[Wed Dec 21 00:55:15 2011] Mean detx,y = (-7233.41, -502.93) 
[Wed Dec 21 00:55:18 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:55:38 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:55:38 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Dec 21 00:55:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Dec 21 03:12:03 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:04 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Dec 21 03:12:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:06 2011] Using photon index=1.80, rate=0.0406, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src28.arf
[Wed Dec 21 03:12:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:06 2011] Updating source flux to 5.4e-13
[Wed Dec 21 03:21:22 2011] Flag c found in src. 28 procflags, skipping spectral fitting