[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (316.5, 129.9) = 17 2 37.37 -48 58 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.9 +/- 20.4
  Background counts = 24.5
  Rate = 0.02 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 12.29'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 12.57"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.979
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.57"
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4.csv
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4.csv
[Tue Dec 20 15:51:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Dec 20 15:51:24 2011] Warning, spatial fit 4 centroid is now closest to src. 14
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 753.983000, observed total counts = 751.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 2 = 1.790049 pixels
[Tue Dec 20 15:51:24 2011] Warning, changing simple spatial fit ID from 4 to 11
[Tue Dec 20 15:51:24 2011] 629.809000 total counts/ 197.607000 bgd. counts: snr = 30.745787
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.790049 pixels
  Position = (318.1, 128.9) = 17 2 36.69 -48 58 3.9
  Extent = 18.1 (13.3-23.0)", rotation angle = 0
  Source counts = 432.2 +/- 25.1
  Background counts = 197.6
  Rate = 0.03 +/- 0.002
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 3
[Tue Dec 20 15:51:24 2011] Source is confused with source 14
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 18.06"
[Tue Dec 20 18:53:40 2011] source mask rpix=4.2, npix_max = 86, mask sum = 96, frac = 1.110
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 18.06"
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 22:31:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 4 centroid is now closest to src. 13
[Tue Dec 20 22:32:03 2011] Spatial fit model total counts = 2668.890000, observed total counts = 2672.000000
[Tue Dec 20 22:32:03 2011] Offset between fit and detection position for source 2 = 0.923278 pixels
[Tue Dec 20 22:32:03 2011] Warning, changing simple spatial fit ID from 4 to 27
[Tue Dec 20 22:32:03 2011] 2541.249000 total counts/ 2195.820000 bgd. counts: snr = 7.371577
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.923278 pixels
  Position = (317.4, 128.3) = 17 2 36.97 -48 58 6.8
  Extent = 16.4 (13.7-20.1)", rotation angle = 0
  Source counts = 345.4 +/- 50.4
  Background counts = 2195.8
  Rate = 0.03 +/- 0.004
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(27567.942000, 11110.722000, 984.000028, 984.000028, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (261, 72) - (374, 185)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(27567.942000, 11110.722000, 1640.000047, 3280.000094, X, Y) && !ellipse(27005.096252, 13531.032318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.231800, 15398.951400, 1484.080043, 1484.080043, 0.000000, X, Y) && !ellipse(27254.840000, 13242.268000, 1533.848044, 1533.848044, 0.000000, X, Y) && !ellipse(27583.210297, 10815.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.102200, 12554.736600, 619.088018, 619.088018, 0.000000, X, Y) && !ellipse(27856.298645, 9003.742073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.322000, 15180.828000, 1728.640050, 1728.640050, 0.000000, X, Y) && !ellipse(27927.778000, 9892.836000, 949.936027, 949.936027, 0.000000, X, Y) && !ellipse(28082.310669, 8487.123817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26796.222000, 12050.982000, 2011.896058, 2011.896058, 0.000000, X, Y) && !ellipse(28175.783630, 7916.056885, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2.gif
[Wed Dec 21 00:42:26 2011] Mean detx,y = (168.17, 13242.62) 
[Wed Dec 21 00:42:28 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:42:58 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:42:58 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 00:42:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 21 03:12:02 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:02 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 03:12:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:04 2011] Using photon index=1.80, rate=0.0261, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src2.arf
[Wed Dec 21 03:12:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:04 2011] Updating source flux to 5.1e-12
[Wed Dec 21 03:21:22 2011] Flag c found in src. 2 procflags, skipping spectral fitting