[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (205.2, 299.0) = 17 3 26.37 -48 45 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 12.8
  Background counts = 94.4
  Rate = 0.009 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 6.76'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.857
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 9.81"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Dec 20 15:51:24 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.619074 pixels away
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 22
[Tue Dec 20 18:53:40 2011] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Dec 20 18:53:40 2011] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.857
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 9.81"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src19.ximg exists
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Dec 20 22:31:38 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src19 appears to have run properly
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 19 centroid is now closest to src. 21
[Tue Dec 20 22:32:03 2011] Spatial fit model total counts = 1120.890000, observed total counts = 1115.000000
[Tue Dec 20 22:32:03 2011] Offset between fit and detection position for source 19 = 9.130843 pixels
[Tue Dec 20 22:32:03 2011] Warning, changing simple spatial fit ID from 19 to 21
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 9.130843 pixels
  Position = (196.4, 296.5) = 17 3 30.24 -48 45 54.5
  Extent = 19.9 (19.8-39.8)", rotation angle = 0
  Source counts = 441.3 +/- 21.0
  Background counts = 0.0
  Rate = 0.03 +/- 0.002
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(17040.942000, 25746.284000, 1193.340034, 1193.340034, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (128, 228) - (265, 365)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(17040.942000, 25746.284000, 1988.900057, 3977.800114, X, Y) && !ellipse(18127.226000, 24174.193000, 1591.984046, 199.576006, 251.620000, X, Y) && !ellipse(17842.592000, 24834.650000, 1591.120046, 1591.120046, 0.000000, X, Y) && !ellipse(18424.615200, 21916.775400, 620.645618, 620.645618, 0.000000, X, Y) && !ellipse(21332.673000, 30768.668000, 1488.504043, 1488.504043, 0.000000, X, Y) && !ellipse(18247.538000, 23077.864000, 685.152020, 685.152020, 0.000000, X, Y) && !ellipse(17521.388687, 25054.055939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18049.149200, 23300.052000, 1398.296040, 1398.296040, 0.000000, X, Y) && !ellipse(17978.572000, 23549.190000, 1344.808039, 1344.808039, 0.000000, X, Y) && !ellipse(17661.612400, 24190.978000, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(17587.112000, 21497.110200, 2095.616060, 803.496023, 180.182000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19.gif
[Wed Dec 21 00:53:05 2011] Mean detx,y = (-7550.80, -3021.13) 
[Wed Dec 21 00:53:07 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:53:53 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:53:54 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Dec 21 00:53:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Dec 21 03:12:03 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:03 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Dec 21 03:12:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:05 2011] Using photon index=1.80, rate=0.0333, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src19.arf
[Wed Dec 21 03:12:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:05 2011] Updating source flux to 4.2e-13
[Wed Dec 21 03:21:22 2011] Flag c found in src. 19 procflags, skipping spectral fitting