[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (368.4, 313.0) = 17 2 14.60 -48 44 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.2 +/- 18.0
  Background counts = 95.2
  Rate = 0.01 +/- 0.002

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 5.18'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 9.02"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.133
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 9.02"
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15.csv
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15.csv
[Tue Dec 20 15:51:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Dec 20 15:51:24 2011] Source 18 is offset by -7.698975 and 4.523235 pixels which is larger than
2 X fitted extent = 1.046326 x 1.046326, not incorporating fit results
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:53:40 2011] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 9.02"
[Tue Dec 20 18:53:40 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.133
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 9.02"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14.csv
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14.csv
[Tue Dec 20 22:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Dec 20 22:32:03 2011] Spatial fit model total counts = 1194.000000, observed total counts = 1194.000000
[Tue Dec 20 22:32:03 2011] Offset between fit and detection position for source 18 = 5.358054 pixels
[Tue Dec 20 22:32:03 2011] 1213.086000 total counts/ 698.620000 bgd. counts: snr = 19.464183
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.358054 pixels
  Position = (364.8, 317.0) = 17 2 16.18 -48 44 25.8
  Extent = 18.0 (18.0-36.1)", rotation angle = 0
  Source counts = 514.5 +/- 34.8
  Background counts = 698.6
  Rate = 0.04 +/- 0.003
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(31688.428000, 27527.430000, 1082.160031, 1082.160031, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (303, 255) - (427, 379)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(31688.428000, 27527.430000, 1803.600052, 3607.200104, X, Y) && !ellipse(31924.467285, 24663.742737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32308.199200, 23570.744000, 1472.455026, 1472.455026, 0.000000, X, Y) && !ellipse(31899.045380, 25669.674927, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18.gif
[Wed Dec 21 00:49:30 2011] Mean detx,y = (7378.54, -2136.58) 
[Wed Dec 21 00:49:33 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:50:12 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:50:12 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 21 00:50:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Dec 21 03:12:02 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:02 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 21 03:12:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:05 2011] Using photon index=1.80, rate=0.0388, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src18.arf
[Wed Dec 21 03:12:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:05 2011] Updating source flux to 5.6e-13
[Wed Dec 21 03:21:22 2011] Flag b found in src. 18 procflags, skipping spectral fitting