[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (309.5, 172.0) = 17 2 40.48 -48 55 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 16.4
  Background counts = 59.4
  Rate = 0.01 +/- 0.001

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 9.20'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 11.03"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.814
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 11.03"
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18.csv
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Dec 20 15:51:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18.csv
[Tue Dec 20 15:51:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 1064.210000, observed total counts = 1062.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 12 = 3.300841 pixels
[Tue Dec 20 15:51:24 2011] Warning, changing simple spatial fit ID from 18 to 5
[Tue Dec 20 15:51:24 2011] 987.944000 total counts/ 533.595000 bgd. counts: snr = 19.669064
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.300841 pixels
  Position = (310.9, 175.0) = 17 2 39.87 -48 54 43.3
  Extent = 21.6 (6.8-43.2)", rotation angle = 0
  Source counts = 454.3 +/- 31.4
  Background counts = 533.6
  Rate = 0.03 +/- 0.002
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 6
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 21.61"
[Tue Dec 20 18:53:40 2011] source mask rpix=5.0, npix_max = 119, mask sum = 95, frac = 0.795
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 21.61"
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17.csv
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Dec 20 22:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17.csv
[Tue Dec 20 22:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Dec 20 22:32:03 2011] Source 12 is offset by 0.774071 and 7.113416 pixels which is larger than
2 X fitted extent = 5.538161 x 5.538161, not incorporating fit results
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 17 centroid is now closest to src. 6
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(26997.322000, 15180.828000, 1296.480037, 1296.480037, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (236, 101) - (385, 250)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(26997.322000, 15180.828000, 2160.800062, 4321.600124, X, Y) && !ellipse(26476.899414, 17420.160385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26756.274000, 16273.520000, 1648.552047, 1648.552047, 0.000000, X, Y) && !ellipse(27005.096252, 13531.032318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.942000, 11110.722000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(26834.231800, 15398.951400, 1484.080043, 1484.080043, 0.000000, X, Y) && !ellipse(27254.840000, 13242.268000, 1533.848044, 1533.848044, 0.000000, X, Y) && !ellipse(27583.210297, 10815.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.102200, 12554.736600, 619.088018, 619.088018, 0.000000, X, Y) && !ellipse(26796.222000, 12050.982000, 2011.896058, 2011.896058, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12.gif
[Wed Dec 21 00:51:22 2011] Mean detx,y = (292.35, 9055.88) 
[Wed Dec 21 00:51:25 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:52:23 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:52:24 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Dec 21 00:52:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Dec 21 03:12:03 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:03 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Dec 21 03:12:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:05 2011] Using photon index=1.80, rate=0.0343, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src12.arf
[Wed Dec 21 03:12:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:05 2011] Updating source flux to 8.5e-13
[Wed Dec 21 03:21:22 2011] Flag b found in src. 12 procflags, skipping spectral fitting
[Wed Dec 21 03:21:22 2011] Flag c found in src. 12 procflags, skipping spectral fitting