[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (305.8, 191.8) = 17 2 42.10 -48 53 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.9 +/- 27.5
  Background counts = 74.3
  Rate = 0.03 +/- 0.004

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 7.75'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.638
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.30"
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Dec 20 15:51:00 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Dec 20 15:51:24 2011] Source 11 is offset by -7.856859 and -0.527480 pixels which is larger than
2 X fitted extent = 1.146667 x 1.146667, not incorporating fit results
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 1153.990000, observed total counts = 1154.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 11 = 4.772020 pixels
[Tue Dec 20 15:51:24 2011] 1104.806000 total counts/ 700.017000 bgd. counts: snr = 15.299400
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.772020 pixels
  Position = (308.1, 187.6) = 17 2 41.10 -48 53 48.7
  Extent = 20.6 (20.3-41.2)", rotation angle = 0
  Source counts = 404.8 +/- 33.2
  Background counts = 700.0
  Rate = 0.03 +/- 0.003
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 10
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 20.61"
[Tue Dec 20 18:53:40 2011] source mask rpix=4.7, npix_max = 109, mask sum = 79, frac = 0.720
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 20.61"
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 22:31:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Dec 20 22:31:38 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Dec 20 22:31:38 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 2 centroid is now closest to src. 6
[Tue Dec 20 22:32:03 2011] Source 11 is offset by -8.833839 and -1.325264 pixels which is larger than
2 X fitted extent = 1.241835 x 1.241835, not incorporating fit results
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(26756.274000, 16273.520000, 1236.414036, 1236.414036, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (237, 117) - (379, 259)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(26756.274000, 16273.520000, 2060.690059, 4121.380119, X, Y) && !ellipse(26476.899414, 17420.160385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.096252, 13531.032318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.942000, 11110.722000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(26834.231800, 15398.951400, 1484.080043, 1484.080043, 0.000000, X, Y) && !ellipse(27254.840000, 13242.268000, 1533.848044, 1533.848044, 0.000000, X, Y) && !ellipse(27398.102200, 12554.736600, 619.088018, 619.088018, 0.000000, X, Y) && !ellipse(26997.322000, 15180.828000, 1728.640050, 1728.640050, 0.000000, X, Y) && !ellipse(26796.222000, 12050.982000, 2011.896058, 2011.896058, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11.gif
[Wed Dec 21 00:39:56 2011] Mean detx,y = (281.85, 7968.60) 
[Wed Dec 21 00:39:58 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:41:13 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:41:13 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Dec 21 00:41:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Dec 21 03:12:01 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:02 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Dec 21 03:12:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:04 2011] Using photon index=1.80, rate=0.0305, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11.arf
[Wed Dec 21 03:12:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:04 2011] Updating source flux to 5.7e-13
[Wed Dec 21 03:21:22 2011] Flag b found in src. 11 procflags, skipping spectral fitting
[Wed Dec 21 03:21:22 2011] Flag c found in src. 11 procflags, skipping spectral fitting
[Wed Dec 21 03:29:19 2011] Reading fit data from xmm0148220301/analysis//spectral/fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_pl.csv
[Wed Dec 21 03:29:19 2011] Spectral fit parameter nH value = 9.21733e+21
[Wed Dec 21 03:29:19 2011] Spectral fit parameter PhoIndex value = 3.97889
[Wed Dec 21 03:29:19 2011] Failed to get F(0.3-8.0) from xmm0148220301/analysis//spectral/fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 03:29:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:29:19 2011] Using Nh = 9.2e+21, photon index=3.98, rate=0.0305, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src11.arf
[Wed Dec 21 03:29:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:29:19 2011] Updating source flux to 4.5e-13