[Tue Dec 20 10:16:56 2011] Detection parameters:
  Position = (312.4, 151.2) = 17 2 39.20 -48 56 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.0 +/- 19.9
  Background counts = 34.9
  Rate = 0.01 +/- 0.001

[Tue Dec 20 10:16:57 2011] Off-axis axis estimate = 10.72'
[Tue Dec 20 12:51:33 2011] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:51:33 2011] Initial guess for spatial extent in simple fitting = 11.79"
[Tue Dec 20 12:51:33 2011] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.800
[Tue Dec 20 12:51:33 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 11.79"
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8.csv
[Tue Dec 20 15:51:00 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Dec 20 15:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8.csv
[Tue Dec 20 15:51:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Dec 20 15:51:01 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Dec 20 15:51:01 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Dec 20 15:51:24 2011] Spatial fit model total counts = 851.579000, observed total counts = 854.000000
[Tue Dec 20 15:51:24 2011] Offset between fit and detection position for source 1 = 2.148070 pixels
[Tue Dec 20 15:51:24 2011] Warning, changing simple spatial fit ID from 8 to 3
[Tue Dec 20 15:51:24 2011] 683.800000 total counts/ 176.398000 bgd. counts: snr = 38.203693
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.148070 pixels
  Position = (313.8, 152.8) = 17 2 38.56 -48 56 20.2
  Extent = 19.2 (14.4-23.2)", rotation angle = 0
  Source counts = 507.4 +/- 26.1
  Background counts = 176.4
  Rate = 0.04 +/- 0.002
[Tue Dec 20 15:51:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:24 2011] Source does appear to be extended
[Tue Dec 20 15:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:24 2011] Source is confused with source 5
[Tue Dec 20 18:53:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 18:53:40 2011] Initial guess for spatial extent in simple fitting = 19.17"
[Tue Dec 20 18:53:40 2011] source mask rpix=4.4, npix_max = 96, mask sum = 87, frac = 0.903
[Tue Dec 20 18:53:40 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 19.17"
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8.csv
[Tue Dec 20 22:31:37 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Dec 20 22:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8.csv
[Tue Dec 20 22:31:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Dec 20 22:31:39 2011] fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Dec 20 22:31:39 2011] Fit fullrun_mos2_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Dec 20 22:32:03 2011] Warning, spatial fit 8 centroid is now closest to src. 13
[Tue Dec 20 22:32:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:32:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:32:03 2011] Source does appear to be extended
[Tue Dec 20 22:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 00:39:16 2011] XMMSAS src. selection expression = ellipse(27254.840000, 13242.268000, 1150.386033, 1150.386033, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing source region out to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 21 00:39:16 2011] Extracting stamp from image fullrun_mos2_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (248, 87) - (380, 219)
[Wed Dec 21 00:39:16 2011] XMMSAS bgd. selection expression = annulus(27254.840000, 13242.268000, 1917.310055, 3834.620110, X, Y) && !ellipse(26476.899414, 17420.160385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26756.274000, 16273.520000, 1648.552047, 1648.552047, 0.000000, X, Y) && !ellipse(27005.096252, 13531.032318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.942000, 11110.722000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(26834.231800, 15398.951400, 1484.080043, 1484.080043, 0.000000, X, Y) && !ellipse(27583.210297, 10815.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.102200, 12554.736600, 619.088018, 619.088018, 0.000000, X, Y) && !ellipse(27856.298645, 9003.742073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.322000, 15180.828000, 1728.640050, 1728.640050, 0.000000, X, Y) && !ellipse(27927.778000, 9892.836000, 949.936027, 949.936027, 0.000000, X, Y) && !ellipse(26796.222000, 12050.982000, 2011.896058, 2011.896058, 0.000000, X, Y)
[Wed Dec 21 00:39:16 2011] Writing fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1.gif
[Wed Dec 21 00:44:41 2011] Mean detx,y = (199.86, 11058.50) 
[Wed Dec 21 00:44:44 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 00:45:32 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 00:45:32 2011] Setting source spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 00:45:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 21 03:12:02 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:12:02 2011] Error reading totcts from fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 03:12:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:04 2011] Using photon index=1.80, rate=0.0383, arf fullrun_mos2_xmm0148220301_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 03:12:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:04 2011] Getting flux using calc_pl_flux failed
[Wed Dec 21 03:21:22 2011] Flag c found in src. 1 procflags, skipping spectral fitting