[Tue Dec 20 10:16:08 2011] Detection parameters:
  Position = (309.0, 172.0) = 17 2 40.71 -48 54 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 18.2
  Background counts = 74.2
  Rate = 0.01 +/- 0.002

[Tue Dec 20 10:16:09 2011] Off-axis axis estimate = 9.19'
[Tue Dec 20 10:18:57 2011] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 10:18:57 2011] Initial guess for spatial extent in simple fitting = 11.03"
[Tue Dec 20 10:18:57 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.977
[Tue Dec 20 10:18:57 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 11.03"
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9.csv
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9.csv
[Tue Dec 20 12:51:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Dec 20 12:51:33 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Dec 20 15:51:14 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Tue Dec 20 15:51:14 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:14 2011] Assessing source extent using major
[Tue Dec 20 15:51:14 2011] Source does appear to be extended
[Tue Dec 20 15:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:38 2011] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 15:51:38 2011] Initial guess for spatial extent in simple fitting = 11.03"
[Tue Dec 20 15:51:38 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.977
[Tue Dec 20 15:51:38 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 11.03"
[Tue Dec 20 18:53:38 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9.ximg exists
[Tue Dec 20 18:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9.csv
[Tue Dec 20 18:53:38 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Dec 20 18:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9.csv
[Tue Dec 20 18:53:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Dec 20 18:53:39 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Dec 20 22:31:53 2011] Warning, spatial fit 9 centroid is now closest to src. 7
[Tue Dec 20 22:31:53 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.599380 pixels away
[Tue Dec 20 22:31:53 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 119.055592 pixels away
[Tue Dec 20 22:31:53 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:31:53 2011] Assessing source extent using major
[Tue Dec 20 22:31:53 2011] Source does appear to be extended
[Tue Dec 20 22:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 22:31:53 2011] Source is confused with source 8
[Tue Dec 20 22:32:16 2011] XMMSAS src. selection expression = ellipse(26831.457336, 14919.682999, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 20 22:32:16 2011] Writing source region out to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9_src.reg
[Tue Dec 20 22:32:16 2011] Extracting stamp from image fullrun_mos1_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (271, 135) - (346, 210)
[Tue Dec 20 22:32:16 2011] XMMSAS bgd. selection expression = annulus(26831.457336, 14919.682999, 1087.500000, 2175.000000, X, Y) && !ellipse(26243.757400, 17475.451000, 1600.488046, 880.376025, -0.000000, X, Y) && !ellipse(26616.185800, 16041.462000, 1367.104039, 1367.104039, 0.000000, X, Y) && !ellipse(26672.378160, 15633.236200, 1718.080049, 421.405612, 74.629900, X, Y) && !ellipse(26992.102539, 14050.009567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.909729, 13256.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.367035, 12738.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27341.803800, 12323.358000, 1911.728055, 306.894409, 77.594800, X, Y) && !ellipse(27396.406000, 11452.092000, 1846.480053, 1846.480053, 0.000000, X, Y)
[Tue Dec 20 22:32:16 2011] Writing fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9.gif
[Tue Dec 20 22:38:14 2011] Mean detx,y = (9563.03, -242.23) 
[Tue Dec 20 22:38:16 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 22:38:32 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 22:38:32 2011] Setting source spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Dec 20 22:38:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Dec 20 23:28:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 20 23:28:13 2011] rmf not generated due to insufficient counts
[Wed Dec 21 03:11:56 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:11:56 2011] Error reading totcts from fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Dec 21 03:11:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:11:58 2011] Using photon index=1.80, rate=0.0148, arf fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src9.arf
[Wed Dec 21 03:11:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:11:58 2011] Updating source flux to 2.3e-13
[Wed Dec 21 03:12:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting