[Tue Dec 20 10:16:08 2011] Detection parameters:
  Position = (266.0, 403.0) = 17 2 59.60 -48 38 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 16.3
  Background counts = 57.8
  Rate = 0.01 +/- 0.002

[Tue Dec 20 10:16:09 2011] Off-axis axis estimate = 7.93'
[Tue Dec 20 10:18:57 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 10:18:57 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Dec 20 10:18:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.078
[Tue Dec 20 10:18:57 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.40"
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5.csv
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5.csv
[Tue Dec 20 12:51:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Dec 20 12:51:32 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Dec 20 15:51:14 2011] Warning, spatial fit 5 centroid is now closest to src. 24
[Tue Dec 20 15:51:14 2011] Source 5 is offset by -9.312572 and -1.342693 pixels which is larger than
2 X fitted extent = 1.162032 x 1.162032, not incorporating fit results
[Tue Dec 20 15:51:14 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:14 2011] Assessing source extent using major
[Tue Dec 20 15:51:14 2011] Source does appear to be extended
[Tue Dec 20 15:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:14 2011] Source is confused with source 23
[Tue Dec 20 15:51:38 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 15:51:38 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Dec 20 15:51:38 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.078
[Tue Dec 20 15:51:38 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.40"
[Tue Dec 20 18:53:38 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Dec 20 18:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5.csv
[Tue Dec 20 18:53:38 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Dec 20 18:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5.csv
[Tue Dec 20 18:53:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Dec 20 18:53:39 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Dec 20 22:31:53 2011] Spatial fit model total counts = 788.338000, observed total counts = 789.000000
[Tue Dec 20 22:31:53 2011] Offset between fit and detection position for source 5 = 0.397211 pixels
[Tue Dec 20 22:31:53 2011] 620.321900 total counts/ 555.142000 bgd. counts: snr = 2.766379
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.397211 pixels
  Position = (265.8, 403.3) = 17 2 59.67 -48 38 10.3
  Extent = 6.9 (4.1-11.8)", rotation angle = 0
  Source counts = 65.2 +/- 24.9
  Background counts = 555.1
  Rate = 0.005 +/- 0.002
[Tue Dec 20 22:31:53 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:31:53 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:31:53 2011] Source does appear to be extended
[Tue Dec 20 22:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 22:32:16 2011] XMMSAS src. selection expression = ellipse(23078.118500, 35040.072200, 414.856812, 414.856812, 0.000000, X, Y)
[Tue Dec 20 22:32:16 2011] Writing source region out to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5_src.reg
[Tue Dec 20 22:32:16 2011] Extracting stamp from image fullrun_mos1_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (242, 379) - (290, 427)
[Tue Dec 20 22:32:16 2011] XMMSAS bgd. selection expression = annulus(23078.118500, 35040.072200, 691.428020, 1382.856040, X, Y) && !ellipse(22250.890000, 37110.000000, 1870.584054, 1870.584054, 0.000000, X, Y) && !ellipse(22915.054360, 36069.984000, 1010.600029, 1010.600029, 0.000000, X, Y) && !ellipse(22291.298000, 38948.772000, 3093.616089, 463.837613, 76.377700, X, Y) && !ellipse(23044.987600, 35711.434000, 1738.056050, 1738.056050, 0.000000, X, Y) && !ellipse(23215.786200, 34245.934400, 1852.552053, 242.611207, 76.995000, X, Y) && !ellipse(23357.494873, 33621.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.932000, 32393.896000, 1448.608042, 1448.608042, 0.000000, X, Y)
[Tue Dec 20 22:32:16 2011] Writing fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5.gif
[Tue Dec 20 22:35:17 2011] Mean detx,y = (-10883.02, -258.52) 
[Tue Dec 20 22:35:20 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 22:35:34 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 22:35:34 2011] Setting source spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Dec 20 22:35:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Dec 20 23:09:25 2011] Not generating rmf since there are only 65 counts
[Tue Dec 20 23:09:25 2011] rmf not generated due to insufficient counts
[Wed Dec 21 03:11:56 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:11:56 2011] Error reading totcts from fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 21 03:11:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:11:58 2011] Using photon index=1.80, rate=0.00492, arf fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src5.arf
[Wed Dec 21 03:11:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:11:58 2011] Updating source flux to 9.6e-14
[Wed Dec 21 03:12:08 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Dec 21 03:12:08 2011] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Dec 21 03:12:08 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting