[Tue Dec 20 10:16:09 2011] Detection parameters:
  Position = (206.9, 252.2) = 17 3 25.69 -48 49 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 17.5
  Background counts = 93.0
  Rate = 0.009 +/- 0.002

[Tue Dec 20 10:16:09 2011] Off-axis axis estimate = 7.44'
[Tue Dec 20 10:18:57 2011] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 10:18:57 2011] Initial guess for spatial extent in simple fitting = 10.15"
[Tue Dec 20 10:18:57 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.122
[Tue Dec 20 10:18:57 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 10.15"
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30.csv
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30.csv
[Tue Dec 20 12:51:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Dec 20 12:51:33 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Dec 20 15:51:14 2011] Spatial fit model total counts = 1252.200000, observed total counts = 1252.000000
[Tue Dec 20 15:51:14 2011] Offset between fit and detection position for source 30 = 4.452170 pixels
[Tue Dec 20 15:51:14 2011] 1238.053000 total counts/ 813.480000 bgd. counts: snr = 14.886031
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.452170 pixels
  Position = (207.6, 256.6) = 17 3 25.35 -48 48 48.4
  Extent = 20.3 (20.3-40.6)", rotation angle = 0
  Source counts = 424.6 +/- 35.2
  Background counts = 813.5
  Rate = 0.03 +/- 0.003
[Tue Dec 20 15:51:14 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:14 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:14 2011] Source does appear to be extended
[Tue Dec 20 15:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:14 2011] Source is confused with source 29
[Tue Dec 20 15:51:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 15:51:38 2011] Initial guess for spatial extent in simple fitting = 20.30"
[Tue Dec 20 15:51:38 2011] source mask rpix=4.7, npix_max = 106, mask sum = 109, frac = 1.021
[Tue Dec 20 15:51:38 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 20.30"
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30.ximg exists
[Tue Dec 20 18:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30.csv
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Dec 20 18:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30.csv
[Tue Dec 20 18:53:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Dec 20 18:53:40 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Dec 20 22:31:53 2011] Warning, spatial fit 30 centroid is now closest to src. 32
[Tue Dec 20 22:31:53 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:31:53 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:31:53 2011] Source does appear to be extended
[Tue Dec 20 22:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 22:32:17 2011] XMMSAS src. selection expression = ellipse(18015.338600, 22271.446000, 1217.706035, 1217.706035, 0.000000, X, Y)
[Tue Dec 20 22:32:17 2011] Writing source region out to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30_src.reg
[Tue Dec 20 22:32:17 2011] Extracting stamp from image fullrun_mos1_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (138, 187) - (278, 327)
[Tue Dec 20 22:32:17 2011] XMMSAS bgd. selection expression = annulus(18015.338600, 22271.446000, 2029.510058, 4059.020117, X, Y) && !ellipse(18629.253000, 20731.129800, 1625.864047, 693.690420, 80.813000, X, Y) && !ellipse(18033.370600, 24190.532000, 1623.608047, 833.456024, 89.994323, X, Y) && !ellipse(18086.193600, 23502.452600, 1123.008032, 1123.008032, 0.000000, X, Y)
[Tue Dec 20 22:32:17 2011] Writing fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30.gif
[Tue Dec 20 22:54:09 2011] Mean detx,y = (753.83, 7210.13) 
[Tue Dec 20 22:54:11 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 22:55:24 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 22:55:24 2011] Setting source spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Dec 20 22:55:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Dec 21 03:11:58 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:11:58 2011] Error reading totcts from fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Dec 21 03:12:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:12:01 2011] Using photon index=1.80, rate=0.0321, arf fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src30.arf
[Wed Dec 21 03:12:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:12:01 2011] Updating source flux to 3.7e-13
[Wed Dec 21 03:12:08 2011] Flag c found in src. 30 procflags, skipping spectral fitting