[Tue Dec 20 10:16:08 2011] Detection parameters: Position = (266.7, 394.9) = 17 2 59.27 -48 38 43.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 57.0 +/- 14.6 Background counts = 68.6 Rate = 0.008 +/- 0.002 [Tue Dec 20 10:16:09 2011] Off-axis axis estimate = 7.36' [Tue Dec 20 10:18:57 2011] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting [Tue Dec 20 10:18:57 2011] Initial guess for spatial extent in simple fitting = 10.11" [Tue Dec 20 10:18:57 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128 [Tue Dec 20 10:18:57 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 10.11" [Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24.ximg exists [Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24.csv [Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24_1.ximg exists [Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24.csv [Tue Dec 20 12:51:32 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Tue Dec 20 12:51:33 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Tue Dec 20 15:51:14 2011] Source 24 is offset by -8.823043 and 0.469406 pixels which is larger than 2 X fitted extent = 1.194915 x 1.194915, not incorporating fit results [Tue Dec 20 15:51:14 2011] Warning, spatial fit 24 centroid is now closest to src. 5 [Tue Dec 20 15:51:14 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.481929 pixels away [Tue Dec 20 15:51:14 2011] Vigneting correction estimate = 1.000000 [Tue Dec 20 15:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Dec 20 15:51:14 2011] Assessing source extent using major [Tue Dec 20 15:51:14 2011] Source does appear to be extended [Tue Dec 20 15:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Dec 20 15:51:38 2011] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting [Tue Dec 20 15:51:38 2011] Initial guess for spatial extent in simple fitting = 10.11" [Tue Dec 20 15:51:38 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128 [Tue Dec 20 15:51:38 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 10.11" [Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src24.ximg exists [Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src24_1.ximg exists [Tue Dec 20 18:53:39 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src24 appears to have run properly [Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Tue Dec 20 18:53:40 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Tue Dec 20 22:31:53 2011] Spatial fit model total counts = 865.306000, observed total counts = 862.000000 [Tue Dec 20 22:31:53 2011] Offset between fit and detection position for source 24 = 0.983927 pixels [Tue Dec 20 22:31:53 2011] 810.952700 total counts/ 714.844000 bgd. counts: snr = 3.594654 Spatial fit parameters: Offset between fit and detection position for source 24 = 0.983927 pixels Position = (267.4, 394.2) = 17 2 58.98 -48 38 50.0 Extent = 23.2 (19.9-46.3)" x 3.0 (2.9-5.7)", rotation angle = 77 (71-80) degrees Source counts = 96.1 +/- 28.5 Background counts = 714.8 Rate = 0.007 +/- 0.002 [Tue Dec 20 22:31:53 2011] Vigneting correction estimate = 1.000000 [Tue Dec 20 22:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Dec 20 22:31:53 2011] Assessing source extent using major axis lower bound [Tue Dec 20 22:31:53 2011] Source does appear to be extended [Tue Dec 20 22:31:53 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.46 [Tue Dec 20 22:31:53 2011] Source is asymmetric [Tue Dec 20 22:31:53 2011] Source is confused with source 5 [Tue Dec 20 22:31:53 2011] Source is confused with source 25 [Tue Dec 20 22:32:17 2011] XMMSAS src. selection expression = ellipse(23215.786200, 34245.934400, 1389.414040, 181.958405, 76.995000, X, Y) [Tue Dec 20 22:32:17 2011] Writing source region out to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24_src.reg [Tue Dec 20 22:32:17 2011] Extracting stamp from image fullrun_mos1_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (188, 314) - (347, 474) [Tue Dec 20 22:32:17 2011] XMMSAS bgd. selection expression = annulus(23215.786200, 34245.934400, 2315.690067, 4631.380133, X, Y) && !ellipse(22250.890000, 37110.000000, 1870.584054, 1870.584054, 0.000000, X, Y) && !ellipse(23078.118500, 35040.072200, 553.142416, 553.142416, 0.000000, X, Y) && !ellipse(24487.788000, 31351.823400, 1411.424041, 1411.424041, 0.000000, X, Y) && !ellipse(22482.847400, 37866.777800, 575.843217, 575.843217, 0.000000, X, Y) && !ellipse(22915.054360, 36069.984000, 1010.600029, 1010.600029, 0.000000, X, Y) && !ellipse(22291.298000, 38948.772000, 3093.616089, 463.837613, 76.377700, X, Y) && !ellipse(22190.040600, 39335.010000, 1970.832057, 419.032012, 78.083000, X, Y) && !ellipse(23044.987600, 35711.434000, 1738.056050, 1738.056050, 0.000000, X, Y) && !ellipse(23357.494873, 33621.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.932000, 32393.896000, 1448.608042, 1448.608042, 0.000000, X, Y) && !ellipse(23866.252000, 31168.484660, 1623.608047, 1489.128043, 359.999000, X, Y) && !ellipse(21790.093018, 31428.791901, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21918.342000, 39471.774000, 1546.808045, 1546.808045, 0.000000, X, Y) [Tue Dec 20 22:32:17 2011] Writing fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24.gif [Tue Dec 20 22:49:59 2011] Mean detx,y = (-10027.88, -217.65) [Tue Dec 20 22:50:01 2011] Setting backscal keywords in source and bgd. spectrum [Tue Dec 20 22:50:26 2011] Binned source spectrum to 10 counts/bin [Tue Dec 20 22:50:26 2011] Setting source spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Tue Dec 20 22:50:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24_bgd.pi.gz [Wed Dec 21 00:05:59 2011] Not generating rmf since there are only 96 counts [Wed Dec 21 00:05:59 2011] rmf not generated due to insufficient counts [Wed Dec 21 03:11:57 2011] Updating aperture counts using extracted products [Wed Dec 21 03:11:57 2011] Error reading totcts from fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed Dec 21 03:12:00 2011] Calculating source flux in energy range 0.30-8.00 [Wed Dec 21 03:12:00 2011] Using photon index=1.80, rate=0.00726, arf fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src24.arf [Wed Dec 21 03:12:00 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Dec 21 03:12:00 2011] Updating source flux to 1.4e-13 [Wed Dec 21 03:12:08 2011] Flag b found in src. 24 procflags, skipping spectral fitting [Wed Dec 21 03:12:08 2011] Flag c found in src. 24 procflags, skipping spectral fitting [Wed Dec 21 03:12:08 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting