[Tue Dec 20 10:16:08 2011] Detection parameters:
  Position = (264.0, 416.2) = 17 3 0.46 -48 37 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.9 +/- 14.4
  Background counts = 42.9
  Rate = 0.006 +/- 0.001

[Tue Dec 20 10:16:09 2011] Off-axis axis estimate = 8.89'
[Tue Dec 20 10:18:57 2011] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 10:18:57 2011] Initial guess for spatial extent in simple fitting = 10.88"
[Tue Dec 20 10:18:57 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Tue Dec 20 10:18:57 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 10.88"
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19.csv
[Tue Dec 20 12:51:32 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Dec 20 12:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19.csv
[Tue Dec 20 12:51:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Dec 20 12:51:33 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Dec 20 12:51:33 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Dec 20 15:51:14 2011] Source 19 is offset by -7.335564 and -0.492378 pixels which is larger than
2 X fitted extent = 1.292414 x 1.292414, not incorporating fit results
[Tue Dec 20 15:51:14 2011] Warning, spatial fit 19 centroid is now closest to src. 23
[Tue Dec 20 15:51:14 2011] Spatial fit model total counts = 712.221000, observed total counts = 713.000000
[Tue Dec 20 15:51:14 2011] Offset between fit and detection position for source 19 = 1.014828 pixels
[Tue Dec 20 15:51:14 2011] Warning, changing simple spatial fit ID from 19 to 23
[Tue Dec 20 15:51:14 2011] 640.747000 total counts/ 516.853000 bgd. counts: snr = 5.449627
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.014828 pixels
  Position = (263.9, 415.2) = 17 3 0.49 -48 37 18.8
  Extent = 12.6 (2.8-21.3)", rotation angle = 0
  Source counts = 123.9 +/- 25.3
  Background counts = 516.9
  Rate = 0.009 +/- 0.002
[Tue Dec 20 15:51:14 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 15:51:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 15:51:14 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 15:51:14 2011] Source does appear to be extended
[Tue Dec 20 15:51:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 15:51:14 2011] Source is confused with source 23
[Tue Dec 20 15:51:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 15:51:38 2011] Initial guess for spatial extent in simple fitting = 12.63"
[Tue Dec 20 15:51:38 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Tue Dec 20 15:51:38 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 12.63"
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19.ximg exists
[Tue Dec 20 18:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19.csv
[Tue Dec 20 18:53:39 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Dec 20 18:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19.csv
[Tue Dec 20 18:53:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Dec 20 18:53:40 2011] fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Dec 20 18:53:40 2011] Fit fullrun_mos1_xmm0148220301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Dec 20 22:31:53 2011] Warning, spatial fit 19 centroid is now closest to src. 3
[Tue Dec 20 22:31:53 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 22:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 22:31:53 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 22:31:53 2011] Source does appear to be extended
[Tue Dec 20 22:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 22:32:17 2011] XMMSAS src. selection expression = ellipse(22915.054360, 36069.984000, 757.950022, 757.950022, 0.000000, X, Y)
[Tue Dec 20 22:32:17 2011] Writing source region out to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19_src.reg
[Tue Dec 20 22:32:17 2011] Extracting stamp from image fullrun_mos1_xmm0148220301_pi300-10000_cl_sm2.00.img.gz, (220, 372) - (308, 459)
[Tue Dec 20 22:32:17 2011] XMMSAS bgd. selection expression = annulus(22915.054360, 36069.984000, 1263.250036, 2526.500073, X, Y) && !ellipse(22250.890000, 37110.000000, 1870.584054, 1870.584054, 0.000000, X, Y) && !ellipse(23078.118500, 35040.072200, 553.142416, 553.142416, 0.000000, X, Y) && !ellipse(22482.847400, 37866.777800, 575.843217, 575.843217, 0.000000, X, Y) && !ellipse(22291.298000, 38948.772000, 3093.616089, 463.837613, 76.377700, X, Y) && !ellipse(22190.040600, 39335.010000, 1970.832057, 419.032012, 78.083000, X, Y) && !ellipse(23044.987600, 35711.434000, 1738.056050, 1738.056050, 0.000000, X, Y) && !ellipse(23215.786200, 34245.934400, 1852.552053, 242.611207, 76.995000, X, Y) && !ellipse(23357.494873, 33621.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.932000, 32393.896000, 1448.608042, 1448.608042, 0.000000, X, Y) && !ellipse(21918.342000, 39471.774000, 1546.808045, 1546.808045, 0.000000, X, Y)
[Tue Dec 20 22:32:17 2011] Writing fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19.gif
[Tue Dec 20 22:44:02 2011] Mean detx,y = (-11918.52, -295.33) 
[Tue Dec 20 22:44:04 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 22:44:21 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 22:44:22 2011] Setting source spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Dec 20 22:44:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Dec 21 03:11:57 2011] Updating aperture counts using extracted products
[Wed Dec 21 03:11:57 2011] Error reading totcts from fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Dec 21 03:11:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 03:11:59 2011] Using photon index=1.80, rate=0.00935, arf fullrun_mos1_xmm0148220301_pi300-10000_pass1_cl_src19.arf
[Wed Dec 21 03:11:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 03:11:59 2011] Updating source flux to 1.7e-13
[Wed Dec 21 03:12:08 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Wed Dec 21 03:12:08 2011] Flag c found in src. 19 procflags, skipping spectral fitting