[Wed Aug 1 01:24:15 2012] Detection parameters: Position = (467.6, 270.3) = 18 7 42.82 -20 25 23.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 78.1 +/- 15.7 Background counts = 61.1 Rate = 0.003 +/- 0.0007 [Wed Aug 1 01:24:15 2012] Off-axis axis estimate = 12.43' [Wed Aug 1 01:26:44 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 01:26:44 2012] Initial guess for spatial extent in simple fitting = 12.64" [Wed Aug 1 01:26:44 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055 [Wed Aug 1 01:26:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.64" [Wed Aug 1 03:08:58 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_src3.ximg exists [Wed Aug 1 03:08:58 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_src3_1.ximg exists [Wed Aug 1 03:08:58 2012] Fit fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_src3 appears to have run properly [Wed Aug 1 03:08:58 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed Aug 1 03:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed Aug 1 03:08:58 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed Aug 1 03:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed Aug 1 03:08:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 03:15:07 2012] Warning, spatial fit 3 centroid is now closest to src. 28 [Wed Aug 1 03:15:07 2012] Source 3 is offset by -2.946833 and -0.980145 pixels which is larger than 2 X fitted extent = 2.688855 x 2.688855, not incorporating fit results [Wed Aug 1 03:15:07 2012] Source 3 is offset by 2.251282 and 1.392522 pixels which is larger than 2 X fitted extent = 1.442749 x 1.442749, not incorporating fit results [Wed Aug 1 03:15:07 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 03:15:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 03:15:07 2012] Assessing source extent using major [Wed Aug 1 03:15:07 2012] Source does appear to be extended [Wed Aug 1 03:15:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 03:15:21 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 03:15:21 2012] Initial guess for spatial extent in simple fitting = 12.64" [Wed Aug 1 03:15:21 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055 [Wed Aug 1 03:15:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.64" [Wed Aug 1 04:48:51 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3.ximg exists [Wed Aug 1 04:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3.csv [Wed Aug 1 04:48:51 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3_1.ximg exists [Wed Aug 1 04:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3.csv [Wed Aug 1 04:48:51 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 04:48:52 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Wed Aug 1 04:48:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed Aug 1 04:48:52 2012] fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Wed Aug 1 04:48:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed Aug 1 04:48:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 04:54:03 2012] Warning, spatial fit 3 centroid is now closest to src. 20 [Wed Aug 1 04:54:03 2012] Source 3 is offset by -0.864718 and -6.401524 pixels which is larger than 2 X fitted extent = 1.417922 x 1.417922, not incorporating fit results [Wed Aug 1 04:54:03 2012] Spatial fit model total counts = 98.192200, observed total counts = 112.000000 [Wed Aug 1 04:54:03 2012] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Wed Aug 1 04:54:03 2012] Source 3 is offset by 2.453811 and 1.877349 pixels which is larger than 2 X fitted extent = 1.460372 x 1.460372, not incorporating fit results [Wed Aug 1 04:54:03 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 04:54:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 04:54:03 2012] Assessing source extent using major [Wed Aug 1 04:54:03 2012] Source does appear to be extended [Wed Aug 1 04:54:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 04:54:10 2012] XMMSAS src. selection expression = ellipse(40632.623535, 23467.195374, 652.500000, 652.500000, 0.000000, X, Y) [Wed Aug 1 04:54:10 2012] Writing source region out to fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3_src.reg [Wed Aug 1 04:54:10 2012] Extracting stamp from image fullrun_pn_xmm0148210101_pi300-10000_cl_sm2.00.img.gz, (430, 233) - (505, 308) [Wed Aug 1 04:54:10 2012] XMMSAS bgd. selection expression = annulus(40632.623535, 23467.195374, 1087.500000, 2175.000000, X, Y) && !ellipse(38262.542603, 23611.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38987.583313, 23674.433685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38168.639526, 24839.832245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39990.175476, 24210.377899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39806.155396, 23661.641754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39507.297333, 24205.758148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.934723, 23744.170685, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 1 04:54:10 2012] Writing fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3.gif [Wed Aug 1 04:56:08 2012] Mean detx,y = (-15808.33, -547.42) [Wed Aug 1 04:56:10 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 1 04:56:29 2012] Binned source spectrum to 10 counts/bin [Wed Aug 1 04:56:29 2012] Setting source spectrum file to fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Aug 1 04:56:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Aug 1 05:13:03 2012] Not generating rmf since there are only 78 counts [Wed Aug 1 05:13:03 2012] rmf not generated due to insufficient counts [Wed Aug 1 05:28:34 2012] Updating aperture counts using extracted products [Wed Aug 1 05:28:34 2012] Error reading totcts from fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Aug 1 05:28:35 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 1 05:28:35 2012] Using photon index=1.80, rate=0.0033, arf fullrun_pn_xmm0148210101_pi300-10000_pass1_cl_src3.arf [Wed Aug 1 05:28:35 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 1 05:28:35 2012] Updating source flux to 2.7e-14 [Wed Aug 1 05:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting