[Wed Aug  1 01:24:31 2012] Detection parameters:
  Position = (348.6, 116.8) = 18 8 19.64 -20 36 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.7 +/- 22.7
  Background counts = 133.3
  Rate = 0.005 +/- 0.0008

[Wed Aug  1 01:24:31 2012] Off-axis axis estimate = 13.66'
[Wed Aug  1 03:08:59 2012] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 03:08:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 03:08:59 2012] Initial guess for spatial extent in simple fitting = 13.26"
[Wed Aug  1 03:08:59 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Aug  1 03:08:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.26"
[Wed Aug  1 03:13:17 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug  1 03:13:17 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug  1 03:13:17 2012] Fit fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Aug  1 03:13:17 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  1 03:13:17 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  1 03:13:17 2012] Fit fullrun_mos1_xmm0148210101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug  1 03:15:09 2012] Spatial fit model total counts = 80.991000, observed total counts = 81.000000
[Wed Aug  1 03:15:09 2012] Offset between fit and detection position for source 3 = 2.445227 pixels
[Wed Aug  1 03:15:09 2012] 81.538000 total counts/ 20.777600 bgd. counts: snr = 13.329779
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.445227 pixels
  Position = (346.6, 115.3) = 18 8 20.24 -20 36 34.4
  Extent = 26.5 (15.8-53.0)" x 15.8 (8.8-24.4)", rotation angle = 136 (90-165) degrees
  Source counts = 60.8 +/- 9.0
  Background counts = 20.8
  Rate = 0.01 +/- 0.002
[Wed Aug  1 03:15:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:15:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:15:09 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 03:15:09 2012] Source does appear to be extended
[Wed Aug  1 03:15:09 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65
[Wed Aug  1 04:48:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 04:48:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 04:48:52 2012] Initial guess for spatial extent in simple fitting = 21.16"
[Wed Aug  1 04:48:52 2012] source mask rpix=4.9, npix_max = 115, mask sum = 121, frac = 1.051
[Wed Aug  1 04:48:52 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.16"
[Wed Aug  1 04:52:34 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug  1 04:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3.csv
[Wed Aug  1 04:52:34 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug  1 04:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3.csv
[Wed Aug  1 04:52:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 04:52:34 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug  1 04:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug  1 04:52:34 2012] fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug  1 04:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug  1 04:52:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148210101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 04:54:04 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed Aug  1 04:54:04 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 04:54:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 04:54:04 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 04:54:04 2012] Source does appear to be extended
[Wed Aug  1 04:54:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65
[Wed Aug  1 05:20:23 2012] XMMSAS src. selection expression = ellipse(30106.748000, 9986.367400, 1590.960046, 948.168027, 136.274614, X, Y)
[Wed Aug  1 05:20:23 2012] Writing source region out to fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug  1 05:20:23 2012] Extracting stamp from image fullrun_mos1_xmm0148210101_pi300-10000_cl_sm2.00.img.gz, (255, 24) - (438, 207)
[Wed Aug  1 05:20:23 2012] XMMSAS bgd. selection expression = annulus(30106.748000, 9986.367400, 2651.600076, 5303.200153, X, Y)
[Wed Aug  1 05:20:23 2012] Writing fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3.gif
[Wed Aug  1 05:21:27 2012] Mean detx,y = (14324.20, -5810.47) 
[Wed Aug  1 05:21:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 05:22:17 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 05:22:17 2012] Setting source spectrum file to fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  1 05:22:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  1 05:27:07 2012] Not generating rmf since there are only 60 counts
[Wed Aug  1 05:27:07 2012] rmf not generated due to insufficient counts
[Wed Aug  1 05:28:35 2012] Updating aperture counts using extracted products
[Wed Aug  1 05:28:35 2012] Error reading totcts from fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  1 05:28:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 05:28:35 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos1_xmm0148210101_pi300-10000_pass1_cl_src3.arf
[Wed Aug  1 05:28:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 05:28:35 2012] Updating source flux to 3.7e-13
[Wed Aug  1 05:28:36 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting