[Sun May 27 16:56:02 2012] Detection parameters:
  Position = (257.0, 357.3) = 9 56 30.64 -10 0 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 917.2 +/- 37.6
  Background counts = 43.0
  Rate = 0.04 +/- 0.001

[Sun May 27 16:56:02 2012] Off-axis axis estimate = 5.22'
[Sun May 27 16:58:32 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:58:32 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Sun May 27 16:58:32 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.129
[Sun May 27 16:58:32 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.04"
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4.csv
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4.csv
[Sun May 27 17:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 27 17:59:53 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 27 17:59:59 2012] Spatial fit model total counts = 851.768000, observed total counts = 852.000000
[Sun May 27 17:59:59 2012] Offset between fit and detection position for source 3 = 0.227035 pixels
[Sun May 27 17:59:59 2012] 852.377000 total counts/ 310.974000 bgd. counts: snr = 30.701431
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.227035 pixels
  Position = (256.9, 357.5) = 9 56 30.68 -10 0 15.5
  Extent = 5.3 (4.8-5.8)", rotation angle = 0
  Source counts = 541.4 +/- 29.2
  Background counts = 311.0
  Rate = 0.02 +/- 0.001
[Sun May 27 17:59:59 2012] Vigneting correction estimate = 1.000000
[Sun May 27 17:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 17:59:59 2012] Assessing source extent using major axis lower bound
[Sun May 27 17:59:59 2012] Source does appear to be extended
[Sun May 27 17:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:02:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 18:02:11 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Sun May 27 18:02:11 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.016
[Sun May 27 18:02:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.30"
[Sun May 27 19:36:47 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 27 19:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4.csv
[Sun May 27 19:36:47 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 27 19:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4.csv
[Sun May 27 19:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 27 19:36:48 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 27 19:36:53 2012] Spatial fit model total counts = 850.928000, observed total counts = 852.000000
[Sun May 27 19:36:53 2012] Offset between fit and detection position for source 3 = 0.001047 pixels
[Sun May 27 19:36:53 2012] 851.507000 total counts/ 309.752000 bgd. counts: snr = 30.781932
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001047 pixels
  Position = (256.9, 357.5) = 9 56 30.68 -10 0 15.5
  Extent = 5.3 (4.8-5.8)", rotation angle = 0
  Source counts = 541.8 +/- 29.2
  Background counts = 309.8
  Rate = 0.02 +/- 0.001
[Sun May 27 19:36:53 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:53 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:53 2012] Source does appear to be extended
[Sun May 27 19:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:37:18 2012] XMMSAS src. selection expression = ellipse(22302.675560, 31050.631200, 319.213209, 319.213209, 0.000000, X, Y)
[Sun May 27 19:37:18 2012] Writing source region out to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3_src.reg
[Sun May 27 19:37:18 2012] Extracting stamp from image fullrun_mos2_xmm0148170101_pi300-10000_cl_sm2.00.img.gz, (239, 339) - (275, 376)
[Sun May 27 19:37:18 2012] XMMSAS bgd. selection expression = annulus(22302.675560, 31050.631200, 532.022015, 1064.044031, X, Y)
[Sun May 27 19:37:18 2012] Writing fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3.gif
[Sun May 27 19:38:29 2012] Mean detx,y = (3463.18, 4246.00) 
[Sun May 27 19:38:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 19:38:37 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 19:38:37 2012] Setting source spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 19:38:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 27 20:17:25 2012] Updating aperture counts using extracted products
[Sun May 27 20:17:25 2012] Error reading totcts from fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 20:17:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 20:17:25 2012] Using photon index=1.80, rate=0.0203, arf fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src3.arf
[Sun May 27 20:17:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 20:17:25 2012] Updating source flux to 3.2e-13