[Sun May 27 16:56:02 2012] Detection parameters:
  Position = (386.2, 299.2) = 9 55 52.59 -10 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.1 +/- 12.4
  Background counts = 42.2
  Rate = 0.003 +/- 0.0005

[Sun May 27 16:56:02 2012] Off-axis axis estimate = 6.37'
[Sun May 27 16:58:32 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:58:32 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sun May 27 16:58:32 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Sun May 27 16:58:32 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.61"
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 27 17:59:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 27 17:59:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 17:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 27 17:59:53 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 27 17:59:59 2012] Spatial fit model total counts = 190.514000, observed total counts = 181.000000
[Sun May 27 17:59:59 2012] Offset between fit and detection position for source 26 = 0.465631 pixels
[Sun May 27 17:59:59 2012] 194.313800 total counts/ 162.122000 bgd. counts: snr = 2.528275
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.465631 pixels
  Position = (385.9, 298.9) = 9 55 52.70 -10 4 30.3
  Extent = 3.9 (2.6-5.6)", rotation angle = 0
  Source counts = 32.2 +/- 13.9
  Background counts = 162.1
  Rate = 0.001 +/- 0.0005
[Sun May 27 17:59:59 2012] Vigneting correction estimate = 1.000000
[Sun May 27 17:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 17:59:59 2012] Assessing source extent using major axis lower bound
[Sun May 27 17:59:59 2012] Source does appear to be extended
[Sun May 27 17:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:02:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 18:02:11 2012] Initial guess for spatial extent in simple fitting = 3.94"
[Sun May 27 18:02:11 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.137
[Sun May 27 18:02:11 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 3.94"
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23.csv
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23.csv
[Sun May 27 19:36:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 27 19:36:48 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun May 27 19:36:53 2012] Spatial fit model total counts = 190.672000, observed total counts = 181.000000
[Sun May 27 19:36:53 2012] Offset between fit and detection position for source 26 = 0.041531 pixels
[Sun May 27 19:36:53 2012] 194.449000 total counts/ 161.577000 bgd. counts: snr = 2.586047
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.041531 pixels
  Position = (385.9, 298.9) = 9 55 52.69 -10 4 30.2
  Extent = 4.1 (2.6-5.6)", rotation angle = 0
  Source counts = 32.9 +/- 13.9
  Background counts = 161.6
  Rate = 0.001 +/- 0.0005
[Sun May 27 19:36:53 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:53 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:53 2012] Source does appear to be extended
[Sun May 27 19:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:36:53 2012] Deleting source due to low Poisson probability 1.0