[Sun May 27 16:56:02 2012] Detection parameters:
  Position = (176.9, 322.0) = 9 56 54.25 -10 2 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 12.1
  Background counts = 32.6
  Rate = 0.002 +/- 0.0004

[Sun May 27 16:56:02 2012] Off-axis axis estimate = 8.98'
[Sun May 27 16:58:32 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:58:32 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Sun May 27 16:58:32 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sun May 27 16:58:32 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.92"
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28.csv
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28.csv
[Sun May 27 17:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:59:54 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May 27 17:59:54 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May 27 17:59:54 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun May 27 17:59:59 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.592096 pixels away
[Sun May 27 17:59:59 2012] Vigneting correction estimate = 1.000000
[Sun May 27 17:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 17:59:59 2012] Assessing source extent using major
[Sun May 27 17:59:59 2012] Source does appear to be extended
[Sun May 27 17:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:02:11 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sun May 27 18:02:11 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Sun May 27 18:02:11 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sun May 27 18:02:11 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.92"
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25.csv
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25.csv
[Sun May 27 19:36:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May 27 19:36:48 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun May 27 19:36:53 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.452274 pixels away
[Sun May 27 19:36:53 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:53 2012] Assessing source extent using major
[Sun May 27 19:36:53 2012] Source does appear to be extended
[Sun May 27 19:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:37:18 2012] XMMSAS src. selection expression = ellipse(15341.046768, 27968.704620, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 19:37:18 2012] Writing source region out to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23_src.reg
[Sun May 27 19:37:18 2012] Extracting stamp from image fullrun_mos2_xmm0148170101_pi300-10000_cl_sm2.00.img.gz, (139, 285) - (214, 360)
[Sun May 27 19:37:18 2012] XMMSAS bgd. selection expression = annulus(15341.046768, 27968.704620, 1087.500000, 2175.000000, X, Y)
[Sun May 27 19:37:18 2012] Writing fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23.gif
[Sun May 27 19:44:45 2012] Mean detx,y = (10935.65, 2998.65) 
[Sun May 27 19:44:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 19:44:53 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 19:44:53 2012] Setting source spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May 27 19:44:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun May 27 20:15:39 2012] Not generating rmf since there are only 57 counts
[Sun May 27 20:15:39 2012] rmf not generated due to insufficient counts
[Sun May 27 20:17:25 2012] Updating aperture counts using extracted products
[Sun May 27 20:17:25 2012] Error reading totcts from fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May 27 20:17:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 20:17:26 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src23.arf
[Sun May 27 20:17:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 20:17:26 2012] Updating source flux to 3.8e-14
[Sun May 27 20:17:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting