[Sun May 27 16:56:02 2012] Detection parameters:
  Position = (355.5, 378.9) = 9 56 1.65 -9 58 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.2 +/- 16.0
  Background counts = 46.4
  Rate = 0.004 +/- 0.0006

[Sun May 27 16:56:02 2012] Off-axis axis estimate = 7.15'
[Sun May 27 16:58:32 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:58:32 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Sun May 27 16:58:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.957
[Sun May 27 16:58:32 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.00"
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19.csv
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun May 27 17:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19.csv
[Sun May 27 17:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun May 27 17:59:53 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun May 27 17:59:53 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun May 27 17:59:59 2012] Spatial fit model total counts = 740.331000, observed total counts = 738.000000
[Sun May 27 17:59:59 2012] Offset between fit and detection position for source 15 = 9.798825 pixels
[Sun May 27 17:59:59 2012] 739.230000 total counts/ 482.445000 bgd. counts: snr = 11.690841
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 9.798825 pixels
  Position = (364.2, 374.4) = 9 55 59.09 -9 59 2.0
  Extent = 19.9 (19.7-20.0)", rotation angle = 0
  Source counts = 256.8 +/- 27.2
  Background counts = 482.4
  Rate = 0.01 +/- 0.001
[Sun May 27 17:59:59 2012] Vigneting correction estimate = 1.000000
[Sun May 27 17:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 17:59:59 2012] Assessing source extent using major axis lower bound
[Sun May 27 17:59:59 2012] Source does appear to be extended
[Sun May 27 17:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 17:59:59 2012] Source is confused with source 2
[Sun May 27 18:02:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 18:02:11 2012] Initial guess for spatial extent in simple fitting = 19.91"
[Sun May 27 18:02:11 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.970
[Sun May 27 18:02:11 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 19.91"
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19.csv
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun May 27 19:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19.csv
[Sun May 27 19:36:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun May 27 19:36:48 2012] fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun May 27 19:36:48 2012] Fit fullrun_mos2_xmm0148170101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun May 27 19:36:53 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 20.664110 pixels away
[Sun May 27 19:36:53 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:53 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:53 2012] Source does appear to be extended
[Sun May 27 19:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:37:18 2012] XMMSAS src. selection expression = ellipse(31636.766000, 32520.394000, 1194.300034, 1194.300034, 0.000000, X, Y)
[Sun May 27 19:37:18 2012] Writing source region out to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15_src.reg
[Sun May 27 19:37:18 2012] Extracting stamp from image fullrun_mos2_xmm0148170101_pi300-10000_cl_sm2.00.img.gz, (296, 306) - (433, 443)
[Sun May 27 19:37:18 2012] XMMSAS bgd. selection expression = annulus(31636.766000, 32520.394000, 1990.500057, 3981.000115, X, Y) && !ellipse(31995.633200, 31947.038000, 978.640028, 978.640028, 0.000000, X, Y) && !ellipse(32502.791077, 32510.254364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33569.100800, 31581.832200, 261.818408, 261.818408, 0.000000, X, Y) && !ellipse(33363.456000, 31243.034000, 1632.584047, 1632.584047, 0.000000, X, Y) && !ellipse(32011.982361, 31204.651672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33345.993866, 32489.263702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28317.938080, 32570.163000, 311.151209, 311.151209, 0.000000, X, Y) && !ellipse(32435.002000, 33446.148000, 1740.704050, 1740.704050, 0.000000, X, Y)
[Sun May 27 19:37:18 2012] Writing fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15.gif
[Sun May 27 19:42:44 2012] Mean detx,y = (-6212.58, 3244.17) 
[Sun May 27 19:42:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 19:43:19 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 19:43:19 2012] Setting source spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 27 19:43:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 27 20:17:25 2012] Updating aperture counts using extracted products
[Sun May 27 20:17:25 2012] Error reading totcts from fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 27 20:17:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 20:17:26 2012] Using photon index=1.80, rate=0.00961, arf fullrun_mos2_xmm0148170101_pi300-10000_pass1_cl_src15.arf
[Sun May 27 20:17:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 20:17:26 2012] Updating source flux to 1.2e-13
[Sun May 27 20:17:26 2012] Flag c found in src. 15 procflags, skipping spectral fitting