[Sun May 27 10:06:35 2012] Detection parameters:
  Position = (313.5, 279.8) = 4 26 0.74 -57 12 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5596.9 +/- 88.7
  Background counts = 6.6
  Rate = 2 +/- 0.04

[Sun May 27 10:06:35 2012] Off-axis axis estimate = 1.74'
[Sun May 27 10:14:08 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:14:08 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun May 27 10:14:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun May 27 10:14:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun May 27 10:29:06 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 10:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:29:06 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 10:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:29:06 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 10:29:06 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 10:29:06 2012] Fit fullrun_mos2_xmm0148000701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 10:29:12 2012] Spatial fit model total counts = 3392.150000, observed total counts = 3257.000000
[Sun May 27 10:29:12 2012] Offset between fit and detection position for source 1 = 0.143534 pixels
[Sun May 27 10:29:12 2012] 3384.821000 total counts/ 920.251000 bgd. counts: snr = 81.243385
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.143534 pixels
  Position = (313.4, 279.6) = 4 26 0.76 -57 12 1.9
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2464.6 +/- 58.2
  Background counts = 920.3
  Rate = 2 +/- 0.04
[Sun May 27 10:29:12 2012] Vigneting correction estimate = 1.000000
[Sun May 27 10:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 10:29:12 2012] Assessing source extent using major axis lower bound
[Sun May 27 10:29:12 2012] Source does appear to be extended
[Sun May 27 10:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 10:34:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 10:34:06 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Sun May 27 10:34:06 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.771
[Sun May 27 10:34:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.26"
[Sun May 27 10:35:18 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 10:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 10:35:18 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 10:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 10:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:35:18 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 10:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 27 10:35:18 2012] fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 10:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 27 10:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148000701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:35:20 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun May 27 10:35:20 2012] Source 1 in spatial fitting is no longer close to this source
[Sun May 27 10:35:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 10:35:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 10:35:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 10:35:20 2012] Source does appear to be extended
[Sun May 27 10:35:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 10:53:28 2012] Counts = 2464.570000, rescaling region sizes by 2.000000
[Sun May 27 10:53:28 2012] XMMSAS src. selection expression = ellipse(27221.540000, 24280.728600, 630.724818, 630.724818, 0.000000, X, Y)
[Sun May 27 10:53:28 2012] Writing source region out to fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 10:53:28 2012] Extracting stamp from image fullrun_mos2_xmm0148000701_pi300-10000_cl_sm2.00.img.gz, (277, 243) - (350, 316)
[Sun May 27 10:53:28 2012] XMMSAS bgd. selection expression = annulus(27221.540000, 24280.728600, 2102.416060, 4204.832121, X, Y)
[Sun May 27 10:53:28 2012] Writing fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1.gif
[Sun May 27 10:53:29 2012] Mean detx,y = (17.32, 95.34) 
[Sun May 27 10:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 10:53:54 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 10:53:54 2012] Setting source spectrum file to fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 10:53:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 27 10:58:00 2012] Updating aperture counts using extracted products
[Sun May 27 10:58:00 2012] Error reading totcts from fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 10:58:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:58:00 2012] Using photon index=1.80, rate=1.75, arf fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1.arf
[Sun May 27 10:58:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:58:00 2012] Updating source flux to 1.9e-11
[Sun May 27 10:58:20 2012] Reading fit data from xmm0148000701/analysis//spectral/fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 27 10:58:20 2012] Spectral fit parameter nH value = 132334000000.0
[Sun May 27 10:58:20 2012] Spectral fit parameter PhoIndex value = 2.23598
[Sun May 27 10:58:20 2012] Failed to get F(0.3-8.0) from xmm0148000701/analysis//spectral/fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 27 10:58:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:58:20 2012] Using Nh = 1.3e+11, photon index=2.24, rate=1.75, arf fullrun_mos2_xmm0148000701_pi300-10000_pass1_cl_src1.arf
[Sun May 27 10:58:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:58:20 2012] Updating source flux to 1.6e-11