[Mon Jun 17 18:41:24 2013] Detection parameters:
  Position = (292.4, 407.4) = 4 26 5.03 -57 5 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.8 +/- 6.2
  Background counts = 4.4
  Rate = 0.003 +/- 0.0008

[Mon Jun 17 18:41:24 2013] Off-axis axis estimate = 7.91'
[Mon Jun 17 19:58:13 2013] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 19:58:13 2013] Initial guess for spatial extent in simple fitting = 10.39"
[Mon Jun 17 19:58:13 2013] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.600
[Mon Jun 17 19:58:13 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.39"
[Mon Jun 17 20:32:44 2013] fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 17 20:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 20:32:44 2013] fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 17 20:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 20:32:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:32:44 2013] fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 17 20:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 20:32:44 2013] fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 17 20:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 20:32:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148000401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:32:57 2013] Spatial fit model total counts = 66.057500, observed total counts = 47.000000
[Mon Jun 17 20:32:57 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 20:32:57 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 20:32:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 20:32:57 2013] Assessing source extent using major
[Mon Jun 17 20:32:57 2013] Source does appear to be extended
[Mon Jun 17 20:32:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 20:32:57 2013] Deleting source due to low Poisson probability 0.8