[Fri Jun 15 23:09:16 2012] Detection parameters:
  Position = (367.5, 172.8) = 4 25 36.08 -57 20 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.8 +/- 22.4
  Background counts = 49.6
  Rate = 0.05 +/- 0.004

[Fri Jun 15 23:09:16 2012] Off-axis axis estimate = 10.40'
[Fri Jun 15 23:18:20 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:18:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 23:18:20 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Fri Jun 15 23:18:20 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Fri Jun 15 23:18:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.63"
[Fri Jun 15 23:21:54 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 15 23:21:54 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 15 23:21:54 2012] Fit fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Jun 15 23:21:54 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 15 23:21:54 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 15 23:21:54 2012] Fit fullrun_mos1_xmm0148000301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 15 23:26:36 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.988435 pixels away
[Fri Jun 15 23:26:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:26:36 2012] Assessing source extent using major
[Fri Jun 15 23:26:36 2012] Source does appear to be extended
[Fri Jun 15 23:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:32:49 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:32:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 23:32:49 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Fri Jun 15 23:32:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Fri Jun 15 23:32:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.63"
[Fri Jun 15 23:35:55 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 15 23:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 23:35:55 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 15 23:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 23:35:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:35:55 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 15 23:35:55 2012] fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 15 23:35:55 2012] Fit fullrun_mos1_xmm0148000301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 15 23:39:28 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.606072 pixels away
[Fri Jun 15 23:39:28 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:39:28 2012] Assessing source extent using major
[Fri Jun 15 23:39:28 2012] Source does appear to be extended
[Fri Jun 15 23:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:55:45 2012] XMMSAS src. selection expression = ellipse(31924.913330, 14983.589554, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:55:45 2012] Writing source region out to fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 23:55:45 2012] Extracting stamp from image fullrun_mos1_xmm0148000301_pi300-10000_cl_sm2.00.img.gz, (330, 135) - (405, 210)
[Fri Jun 15 23:55:45 2012] XMMSAS bgd. selection expression = annulus(31924.913330, 14983.589554, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 23:55:45 2012] Writing fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 23:56:16 2012] Mean detx,y = (-819.61, 11077.60) 
[Fri Jun 15 23:56:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:56:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:56:36 2012] Setting source spectrum file to fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 23:56:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 00:02:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 00:02:02 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:07:36 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:07:36 2012] Error reading totcts from fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 00:07:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:07:36 2012] Using photon index=1.80, rate=0.0472, arf fullrun_mos1_xmm0148000301_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 00:07:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:07:36 2012] Updating source flux to 7.9e-13
[Sat Jun 16 00:07:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting