[Tue Dec 27 10:38:51 2011] Detection parameters:
  Position = (295.3, 274.2) = 4 26 0.67 -57 12 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31601.1 +/- 209.5
  Background counts = 25.3
  Rate = 3 +/- 0.02

[Tue Dec 27 10:38:52 2011] Off-axis axis estimate = 1.77'
[Tue Dec 27 10:44:48 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 10:44:48 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Dec 27 10:44:48 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Tue Dec 27 10:44:48 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.32"
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5.ximg exists
[Tue Dec 27 13:09:29 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5.csv
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Dec 27 13:09:29 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5.csv
[Tue Dec 27 13:09:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Dec 27 13:09:29 2011] Fit fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Dec 27 15:09:08 2011] Spatial fit model total counts = 27183.000000, observed total counts = 27183.000000
[Tue Dec 27 15:09:08 2011] Offset between fit and detection position for source 5 = 0.154812 pixels
[Tue Dec 27 15:09:08 2011] 27232.910000 total counts/ 4981.010000 bgd. counts: snr = 315.288690
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.154812 pixels
  Position = (295.3, 274.3) = 4 26 0.69 -57 12 2.8
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 22251.9 +/- 165.0
  Background counts = 4981.0
  Rate = 2 +/- 0.01
[Tue Dec 27 15:09:08 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 15:09:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 15:09:08 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 15:09:08 2011] Source does appear to be extended
[Tue Dec 27 15:09:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 15:09:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 15:09:37 2011] Initial guess for spatial extent in simple fitting = 5.90"
[Tue Dec 27 15:09:37 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.161
[Tue Dec 27 15:09:37 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.90"
[Tue Dec 27 17:14:47 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5.ximg exists
[Tue Dec 27 17:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5.csv
[Tue Dec 27 17:14:47 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Dec 27 17:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5.csv
[Tue Dec 27 17:14:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Dec 27 17:14:48 2011] Fit fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Dec 27 18:23:40 2011] Spatial fit model total counts = 27183.000000, observed total counts = 27183.000000
[Tue Dec 27 18:23:40 2011] Offset between fit and detection position for source 5 = 0.000060 pixels
[Tue Dec 27 18:23:40 2011] 27232.950000 total counts/ 4978.750000 bgd. counts: snr = 315.392838
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000060 pixels
  Position = (295.3, 274.3) = 4 26 0.69 -57 12 2.8
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 22254.2 +/- 165.0
  Background counts = 4978.8
  Rate = 2 +/- 0.01
[Tue Dec 27 18:23:40 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:23:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:23:40 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 18:23:40 2011] Source does appear to be extended
[Tue Dec 27 18:23:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 18:24:06 2011] Counts = 22254.200000, rescaling region sizes by 3.000000
[Tue Dec 27 18:24:06 2011] XMMSAS src. selection expression = ellipse(25642.171200, 23817.436000, 1062.032359, 1062.032359, 0.000000, X, Y)
[Tue Dec 27 18:24:06 2011] Writing source region out to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5_src.reg
[Tue Dec 27 18:24:06 2011] Extracting stamp from image fullrun_pn_xmm0148000201_pi300-10000_cl_sm2.00.img.gz, (234, 213) - (356, 335)
[Tue Dec 27 18:24:06 2011] XMMSAS bgd. selection expression = annulus(25642.171200, 23817.436000, 5310.161794, 10620.323588, X, Y) && !ellipse(21232.653200, 22434.390000, 419.031212, 419.031212, 0.000000, X, Y) && !ellipse(29110.805660, 20677.989800, 569.871216, 313.434409, 73.578300, X, Y) && !ellipse(14174.372467, 17814.027344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33293.387115, 33478.628510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35970.758484, 32304.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.282257, 32272.987671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31064.265400, 32116.621200, 741.471221, 331.448810, 2.097249, X, Y) && !ellipse(34868.623330, 30607.568043, 645.549268, 292.612985, 63.953092, X, Y) && !ellipse(36835.443115, 29087.374664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31345.903380, 29047.239600, 407.507212, 407.507212, 0.000000, X, Y) && !ellipse(21206.213577, 27943.378296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25771.782460, 27663.660600, 600.522417, 600.522417, 0.000000, X, Y) && !ellipse(33472.840546, 27642.722778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22424.835800, 26605.425400, 459.567213, 459.567213, 0.000000, X, Y) && !ellipse(20915.000671, 25107.188385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23671.984400, 23460.342800, 582.250417, 582.250417, 0.000000, X, Y) && !ellipse(19762.275600, 22845.933200, 408.871212, 408.871212, 0.000000, X, Y) && !ellipse(22078.358400, 22378.277340, 360.128010, 360.128010, 0.000000, X, Y) && !ellipse(26182.217800, 17290.403800, 353.171210, 353.171210, 0.000000, X, Y) && !ellipse(21671.309800, 17321.066400, 418.791212, 418.791212, 0.000000, X, Y) && !ellipse(24080.305359, 20067.304245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.440560, 19017.385400, 399.228811, 399.228811, 0.000000, X, Y) && !ellipse(22246.114000, 18951.038000, 1573.784045, 1573.784045, 0.000000, X, Y) && !ellipse(33445.684906, 18419.530670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16184.742065, 14543.935287, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 18:24:06 2011] Writing fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5.gif
[Tue Dec 27 18:29:37 2011] Mean detx,y = (12.35, -341.57) 
[Tue Dec 27 18:29:52 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 18:41:11 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 18:41:12 2011] Setting source spectrum file to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Dec 27 18:41:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Dec 27 22:02:45 2011] Updating aperture counts using extracted products
[Tue Dec 27 22:02:46 2011] Error reading totcts from fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Dec 27 22:02:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 22:02:48 2011] Using photon index=1.80, rate=1.77, arf fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src5.arf
[Tue Dec 27 22:02:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 22:02:48 2011] Updating source flux to 4.2e-12