[Tue Dec 27 10:38:52 2011] Detection parameters:
  Position = (301.5, 199.2) = 4 25 57.38 -57 17 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.4 +/- 12.6
  Background counts = 19.9
  Rate = 0.009 +/- 0.001

[Tue Dec 27 10:38:52 2011] Off-axis axis estimate = 7.20'
[Tue Dec 27 10:44:48 2011] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 10:44:48 2011] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Dec 27 10:44:48 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Tue Dec 27 10:44:48 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 10.03"
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25.ximg exists
[Tue Dec 27 13:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25.csv
[Tue Dec 27 13:09:29 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Dec 27 13:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25.csv
[Tue Dec 27 13:09:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 13:09:30 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Dec 27 13:09:30 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Dec 27 13:09:30 2011] Fit fullrun_pn_xmm0148000201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Dec 27 15:09:08 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.941603 pixels away
[Tue Dec 27 15:09:08 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 15:09:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 15:09:08 2011] Assessing source extent using major
[Tue Dec 27 15:09:08 2011] Source does appear to be extended
[Tue Dec 27 15:09:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 15:09:37 2011] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 15:09:37 2011] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Dec 27 15:09:37 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Tue Dec 27 15:09:37 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 10.03"
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24.ximg exists
[Tue Dec 27 17:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24.csv
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Dec 27 17:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24.csv
[Tue Dec 27 17:14:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Dec 27 17:14:48 2011] fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Dec 27 17:14:48 2011] Fit fullrun_pn_xmm0148000201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Dec 27 18:23:40 2011] Spatial fit model total counts = 251.000000, observed total counts = 251.000000
[Tue Dec 27 18:23:40 2011] Offset between fit and detection position for source 25 = 0.098073 pixels
[Tue Dec 27 18:23:40 2011] 257.530000 total counts/ 206.934000 bgd. counts: snr = 3.517226
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.098073 pixels
  Position = (301.5, 199.3) = 4 25 57.36 -57 17 29.2
  Extent = 4.4 (3.3-5.9)", rotation angle = 0
  Source counts = 50.6 +/- 16.0
  Background counts = 206.9
  Rate = 0.004 +/- 0.001
[Tue Dec 27 18:23:40 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:23:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:23:40 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 18:23:40 2011] Source does appear to be extended
[Tue Dec 27 18:23:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 18:24:06 2011] XMMSAS src. selection expression = ellipse(26182.217800, 17290.403800, 264.878408, 264.878408, 0.000000, X, Y)
[Tue Dec 27 18:24:06 2011] Writing source region out to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25_src.reg
[Tue Dec 27 18:24:06 2011] Extracting stamp from image fullrun_pn_xmm0148000201_pi300-10000_cl_sm2.00.img.gz, (286, 184) - (317, 215)
[Tue Dec 27 18:24:06 2011] XMMSAS bgd. selection expression = annulus(26182.217800, 17290.403800, 441.464013, 882.928025, X, Y)
[Tue Dec 27 18:24:06 2011] Writing fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25.gif
[Tue Dec 27 19:09:27 2011] Mean detx,y = (2059.09, -6580.26) 
[Tue Dec 27 19:09:35 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 19:10:01 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 19:10:02 2011] Setting source spectrum file to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Dec 27 19:10:02 2011] Setting bgd. spectrum file to fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Dec 27 21:06:50 2011] Not generating rmf since there are only 50 counts
[Tue Dec 27 21:06:50 2011] rmf not generated due to insufficient counts
[Tue Dec 27 22:02:47 2011] Updating aperture counts using extracted products
[Tue Dec 27 22:02:47 2011] Error reading totcts from fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Dec 27 22:02:50 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 22:02:50 2011] Using photon index=1.80, rate=0.00401, arf fullrun_pn_xmm0148000201_pi300-10000_pass1_cl_src25.arf
[Tue Dec 27 22:02:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 22:02:50 2011] Updating source flux to 1.9e-14
[Tue Dec 27 22:04:27 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting