[Fri May 31 17:33:10 2013] Detection parameters:
  Position = (314.6, 387.9) = 18 46 21.86 -78 24 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.4 +/- 13.3
  Background counts = 54.0
  Rate = 0.09 +/- 0.02

[Fri May 31 17:33:15 2013] Off-axis axis estimate = 6.59'
[Fri May 31 17:34:02 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:34:02 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Fri May 31 17:34:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.902
[Fri May 31 17:34:02 2013] Giving source the simple spatial ID 94 for pass 0, mean size = 9.73"
[Fri May 31 17:34:06 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94.ximg exists
[Fri May 31 17:34:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94.csv
[Fri May 31 17:34:06 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94_1.ximg exists
[Fri May 31 17:34:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94.csv
[Fri May 31 17:34:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:10 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Fri May 31 17:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94.csv
[Fri May 31 17:34:10 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Fri May 31 17:34:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94.csv
[Fri May 31 17:34:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:55 2013] Warning, spatial fit 94 centroid is now closest to src. 95
[Fri May 31 17:34:55 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:34:55 2013] Assessing source extent using major
[Fri May 31 17:34:55 2013] Source does appear to be extended
[Fri May 31 17:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:34:55 2013] Source is confused with source 99
[Fri May 31 17:34:55 2013] Source is confused with source 100
[Fri May 31 17:35:21 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:35:21 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Fri May 31 17:35:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.902
[Fri May 31 17:35:21 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 9.73"
[Fri May 31 17:35:26 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86.ximg exists
[Fri May 31 17:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86.csv
[Fri May 31 17:35:26 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86_1.ximg exists
[Fri May 31 17:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86.csv
[Fri May 31 17:35:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:35:31 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Fri May 31 17:35:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86.csv
[Fri May 31 17:35:31 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Fri May 31 17:35:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86.csv
[Fri May 31 17:35:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:36:16 2013] Source 96 is offset by 0.224176 and -6.663354 pixels which is larger than
2 X fitted extent = 1.175664 x 1.175664, not incorporating fit results
[Fri May 31 17:36:16 2013] Source 96 is offset by -2.796675 and 0.917221 pixels which is larger than
2 X fitted extent = 1.956170 x 1.956170, not incorporating fit results
[Fri May 31 17:36:16 2013] Warning, spatial fit 86 centroid is now closest to src. 92
[Fri May 31 17:36:16 2013] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 13.247074 pixels away
[Fri May 31 17:36:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:36:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:36:17 2013] Assessing source extent using major
[Fri May 31 17:36:17 2013] Source does appear to be extended
[Fri May 31 17:36:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:36:53 2013] XMMSAS src. selection expression = ellipse(27324.265289, 33701.526184, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 17:36:53 2013] Not overwriting source region fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_src.reg
[Fri May 31 17:36:53 2013] Extracting stamp from image fullrun_pn_xmm0147920401_pi300-10000_cl_sm2.00.img.gz, (277, 350) - (352, 425)
[Fri May 31 17:36:53 2013] XMMSAS bgd. selection expression = annulus(27324.265289, 33701.526184, 1087.500000, 2175.000000, X, Y) && !ellipse(26015.680000, 36780.310000, 1717.256049, 1717.256049, 0.000000, X, Y) && !ellipse(27051.333588, 36143.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.565521, 35987.047089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26490.793182, 35016.602020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.692749, 34427.105865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.805389, 32771.562347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28149.208560, 37408.336000, 1829.120053, 1829.120053, 0.000000, X, Y) && !ellipse(26387.576263, 36739.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28478.621582, 36418.279602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26555.440491, 36225.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27849.708862, 36065.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.610229, 36560.934326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.417755, 35701.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26647.514252, 35694.863770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28362.190582, 34712.996765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.192963, 34045.846313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.591125, 33179.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26381.171600, 33510.355000, 1515.352044, 1515.352044, 0.000000, X, Y) && !ellipse(27166.713196, 32746.044861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26705.117767, 32323.374817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27678.260345, 31616.090942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26688.213196, 31873.076538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.402649, 31272.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.743073, 30662.571686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 17:36:53 2013] Writing fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96.gif
[Fri May 31 18:14:38 2013] Mean detx,y = (-3436.99, 8956.52) 
[Fri May 31 18:14:42 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 18:15:01 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 18:15:01 2013] Setting source spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Fri May 31 18:15:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Fri May 31 19:43:26 2013] Not generating rmf since there are only 68 counts
[Fri May 31 19:43:26 2013] rmf not generated due to insufficient counts
[Fri May 31 20:02:42 2013] Updating aperture counts using extracted products
[Fri May 31 20:02:42 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_src_b10.pi.gz = 500.00
[Fri May 31 20:02:42 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_bgd.pi.gz = 1156.00
[Fri May 31 20:02:42 2013] Got source and background scale factors 1057686.000000, 2250181.000000
[Fri May 31 20:02:42 2013] User source parameters:
  Position = (314.6, 387.9) = 18 46 21.86 -78 24 2.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -43.4 +/- 23.4
  Background aperture counts = 543.4
  Rate = -0.1 +/- 0.06

[Fri May 31 20:02:42 2013] Updating counts from extracted products
[Fri May 31 20:02:42 2013] Set source signif. to -43.37/23.31 = -1.86
[Fri May 31 20:03:01 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:03:01 2013] Using photon index=1.80, rate=-0.115, arf fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96.arf
[Fri May 31 20:03:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:03:01 2013] Updated flux is not positive, keeping original flux
[Fri May 31 20:03:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:03:27 2013] xmm0147920401/analysis//spectral/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src96_pl.csv not found, spectral fit skipped or did not complete