[Fri May 31 17:33:06 2013] Detection parameters:
  Position = (363.5, 282.5) = 18 45 10.40 -78 31 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.1 +/- 17.7
  Background counts = 20.1
  Rate = 0.4 +/- 0.04

[Fri May 31 17:33:15 2013] Off-axis axis estimate = 4.85'
[Fri May 31 17:34:02 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:34:02 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Fri May 31 17:34:02 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Fri May 31 17:34:02 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 8.86"
[Fri May 31 17:34:05 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58.ximg exists
[Fri May 31 17:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58.csv
[Fri May 31 17:34:05 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri May 31 17:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58.csv
[Fri May 31 17:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri May 31 17:34:08 2013] Fit fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri May 31 17:34:55 2013] Spatial fit model total counts = 875.108000, observed total counts = 816.000000
[Fri May 31 17:34:55 2013] Offset between fit and detection position for source 59 = 2.405637 pixels
[Fri May 31 17:34:55 2013] 842.631000 total counts/ 490.564000 bgd. counts: snr = 15.895620
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 2.405637 pixels
  Position = (365.6, 281.4) = 18 45 7.25 -78 31 46.3
  Extent = 17.7 (17.7-35.4)", rotation angle = 0
  Source counts = 352.1 +/- 29.0
  Background counts = 490.6
  Rate = 0.5 +/- 0.04
[Fri May 31 17:34:55 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:34:55 2013] Assessing source extent using major axis lower bound
[Fri May 31 17:34:55 2013] Source does appear to be extended
[Fri May 31 17:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:34:55 2013] Source is confused with source 46
[Fri May 31 17:35:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 17:35:21 2013] Initial guess for spatial extent in simple fitting = 17.71"
[Fri May 31 17:35:21 2013] source mask rpix=4.1, npix_max = 83, mask sum = 50, frac = 0.598
[Fri May 31 17:35:21 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 17.71"
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52.ximg exists
[Fri May 31 17:35:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52.csv
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri May 31 17:35:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52.csv
[Fri May 31 17:35:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:35:29 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri May 31 17:35:29 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri May 31 17:35:29 2013] Fit fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri May 31 17:36:16 2013] Warning, spatial fit 52 centroid is now closest to src. 58
[Fri May 31 17:36:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:36:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:36:17 2013] Assessing source extent using major axis lower bound
[Fri May 31 17:36:17 2013] Source does appear to be extended
[Fri May 31 17:36:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:36:50 2013] XMMSAS src. selection expression = ellipse(31760.506000, 24436.075600, 1062.660031, 1062.660031, 0.000000, X, Y)
[Fri May 31 17:36:50 2013] Not overwriting source region fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_src.reg
[Fri May 31 17:36:50 2013] Extracting stamp from image fullrun_pn_xmm0147920401_pi300-10000_cl_sm2.00.img.gz, (305, 220) - (427, 343)
[Fri May 31 17:36:50 2013] XMMSAS bgd. selection expression = annulus(31760.506000, 24436.075600, 1771.100051, 3542.200102, X, Y) && !ellipse(36060.713531, 25079.910614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.632538, 24313.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.461548, 26756.258942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.957794, 24490.369324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35374.314117, 25433.852570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33499.649200, 25657.776000, 902.576026, 902.576026, 0.000000, X, Y) && !ellipse(36568.283880, 25134.768000, 1417.176041, 1417.176041, 0.000000, X, Y) && !ellipse(35320.596800, 25039.868000, 1659.976048, 1659.976048, 0.000000, X, Y) && !ellipse(34137.331200, 24703.214000, 1575.512045, 1575.512045, 0.000000, X, Y) && !ellipse(33423.722504, 24921.333679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30483.333313, 24651.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32388.327454, 24630.395569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29358.559357, 24226.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36121.245544, 26051.847809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29531.425659, 24913.182739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29998.471863, 24298.745239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28734.765533, 28751.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29500.635284, 28558.354767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.104034, 28322.001404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.856201, 28043.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29296.487427, 27971.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.938751, 27621.307312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30041.172699, 27425.286499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29191.032318, 27254.841583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.100128, 27001.551788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32166.029816, 26478.165863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30767.238251, 26737.572845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29477.342712, 26659.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35899.830000, 26675.128000, 1658.344048, 1658.344048, 0.000000, X, Y) && !ellipse(34161.491425, 26435.435822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.070892, 26496.068726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29023.906189, 26390.778229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.825958, 26487.246063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33598.266785, 26406.203949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32831.398743, 26150.548523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.860657, 26210.026489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29831.520966, 25964.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28007.441498, 25878.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.833344, 25773.048492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.238312, 25795.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31959.195068, 25611.946625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.760254, 25702.722076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.151611, 25613.359100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29310.168793, 25446.309967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.799408, 25176.641296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31882.716949, 25183.746155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31395.412872, 25183.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.762817, 25084.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.430176, 25008.291199, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 17:36:50 2013] Writing fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59.gif
[Fri May 31 17:52:21 2013] Mean detx,y = (-6566.52, -414.24) 
[Fri May 31 17:52:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 17:53:11 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 17:53:12 2013] Setting source spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri May 31 17:53:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri May 31 20:02:32 2013] Updating aperture counts using extracted products
[Fri May 31 20:02:32 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 1165.00
[Fri May 31 20:02:32 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_bgd.pi.gz = 830.00
[Fri May 31 20:02:32 2013] Got source and background scale factors 2831779.000000, 10906895.000000
[Fri May 31 20:02:32 2013] User source parameters:
  Position = (365.6, 281.4) = 18 45 7.25 -78 31 46.3
  Extent = 17.7 (17.7-35.4)", rotation angle = 0
  Source aperture counts = 949.5 +/- 35.1
  Background aperture counts = 215.5
  Rate = 3 +/- 0.09

[Fri May 31 20:03:00 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:03:00 2013] Using photon index=1.80, rate=0.472, arf fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59.arf
[Fri May 31 20:03:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:03:00 2013] Updating source flux to 2.4e-12
[Fri May 31 20:03:14 2013] Flag c found in src. 59 procflags, skipping spectral fitting
[Fri May 31 20:03:27 2013] xmm0147920401/analysis//spectral/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete