[Fri May 31 17:33:06 2013] Detection parameters:
  Position = (384.7, 287.0) = 18 44 39.44 -78 31 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.2 +/- 17.6
  Background counts = 29.8
  Rate = 0.4 +/- 0.05

[Fri May 31 17:33:15 2013] Off-axis axis estimate = 6.31'
[Fri May 31 17:34:02 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:34:02 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Fri May 31 17:34:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Fri May 31 17:34:02 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.58"
[Fri May 31 17:34:05 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55.ximg exists
[Fri May 31 17:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55.csv
[Fri May 31 17:34:05 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri May 31 17:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55.csv
[Fri May 31 17:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri May 31 17:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri May 31 17:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 31 17:34:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:54 2013] Spatial fit model total counts = 1108.840000, observed total counts = 909.000000
[Fri May 31 17:34:54 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 17:34:55 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:34:55 2013] Assessing source extent using major
[Fri May 31 17:34:55 2013] Source does appear to be extended
[Fri May 31 17:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:34:55 2013] Source is confused with source 55
[Fri May 31 17:35:21 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:35:21 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Fri May 31 17:35:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Fri May 31 17:35:21 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 9.58"
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src49.ximg exists
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri May 31 17:35:24 2013] Fit fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src49 appears to have run properly
[Fri May 31 17:35:29 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri May 31 17:35:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May 31 17:35:29 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri May 31 17:35:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May 31 17:35:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:36:16 2013] Warning, spatial fit 49 centroid is now closest to src. 144
[Fri May 31 17:36:16 2013] Source 56 is offset by 3.298443 and -5.430165 pixels which is larger than
2 X fitted extent = 1.054970 x 1.054970, not incorporating fit results
[Fri May 31 17:36:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:36:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:36:17 2013] Assessing source extent using major
[Fri May 31 17:36:17 2013] Source does appear to be extended
[Fri May 31 17:36:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:36:49 2013] XMMSAS src. selection expression = ellipse(33423.722504, 24921.333679, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 17:36:49 2013] Not overwriting source region fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_src.reg
[Fri May 31 17:36:49 2013] Extracting stamp from image fullrun_pn_xmm0147920401_pi300-10000_cl_sm2.00.img.gz, (347, 250) - (422, 325)
[Fri May 31 17:36:49 2013] XMMSAS bgd. selection expression = annulus(33423.722504, 24921.333679, 1087.500000, 2175.000000, X, Y) && !ellipse(36060.713531, 25079.910614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.957794, 24490.369324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35374.314117, 25433.852570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33499.649200, 25657.776000, 902.576026, 902.576026, 0.000000, X, Y) && !ellipse(36568.283880, 25134.768000, 1417.176041, 1417.176041, 0.000000, X, Y) && !ellipse(35320.596800, 25039.868000, 1659.976048, 1659.976048, 0.000000, X, Y) && !ellipse(34137.331200, 24703.214000, 1575.512045, 1575.512045, 0.000000, X, Y) && !ellipse(30483.333313, 24651.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32388.327454, 24630.395569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31760.506000, 24436.075600, 1416.880041, 1416.880041, 0.000000, X, Y) && !ellipse(36121.245544, 26051.847809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32166.029816, 26478.165863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30767.238251, 26737.572845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35899.830000, 26675.128000, 1658.344048, 1658.344048, 0.000000, X, Y) && !ellipse(34161.491425, 26435.435822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33598.266785, 26406.203949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32831.398743, 26150.548523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.860657, 26210.026489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.833344, 25773.048492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31959.195068, 25611.946625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.151611, 25613.359100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31882.716949, 25183.746155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31395.412872, 25183.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.762817, 25084.094940, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 17:36:49 2013] Writing fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56.gif
[Fri May 31 17:50:37 2013] Mean detx,y = (-8352.67, -452.18) 
[Fri May 31 17:50:41 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 17:51:05 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 17:51:05 2013] Setting source spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri May 31 17:51:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri May 31 19:21:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 19:21:54 2013] rmf not generated due to insufficient counts
[Fri May 31 20:02:31 2013] Updating aperture counts using extracted products
[Fri May 31 20:02:31 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 691.00
[Fri May 31 20:02:31 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_bgd.pi.gz = 3.00
[Fri May 31 20:02:31 2013] Got source and background scale factors 1211638.000000, 692319.000000
[Fri May 31 20:02:31 2013] User source parameters:
  Position = (384.7, 287.0) = 18 44 39.44 -78 31 19.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 685.7 +/- 27.3
  Background aperture counts = 5.3
  Rate = 2 +/- 0.07

[Fri May 31 20:02:31 2013] Updating counts from extracted products
[Fri May 31 20:02:31 2013] Set source signif. to 685.75/2.29 = 299.28
[Fri May 31 20:03:00 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:03:00 2013] Using photon index=1.80, rate=1.82, arf fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56.arf
[Fri May 31 20:03:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:03:00 2013] Updating source flux to 9.5e-12
[Fri May 31 20:03:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:03:27 2013] xmm0147920401/analysis//spectral/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete