[Fri May 31 17:33:05 2013] Detection parameters:
  Position = (315.8, 308.1) = 18 46 20.02 -78 29 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.2 +/- 19.0
  Background counts = 22.0
  Rate = 0.4 +/- 0.04

[Fri May 31 17:33:15 2013] Off-axis axis estimate = 1.44'
[Fri May 31 17:34:02 2013] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:34:02 2013] Initial guess for spatial extent in simple fitting = 7.15"
[Fri May 31 17:34:02 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Fri May 31 17:34:02 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.15"
[Fri May 31 17:34:04 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src43.ximg exists
[Fri May 31 17:34:04 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri May 31 17:34:04 2013] Fit fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src43 appears to have run properly
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri May 31 17:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri May 31 17:34:07 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri May 31 17:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri May 31 17:34:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:54 2013] Warning, spatial fit 43 centroid is now closest to src. 123
[Fri May 31 17:34:55 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:34:55 2013] Assessing source extent using major
[Fri May 31 17:34:55 2013] Source does appear to be extended
[Fri May 31 17:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:34:55 2013] Source is confused with source 127
[Fri May 31 17:34:55 2013] Source is confused with source 137
[Fri May 31 17:35:21 2013] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:35:21 2013] Initial guess for spatial extent in simple fitting = 7.15"
[Fri May 31 17:35:21 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Fri May 31 17:35:21 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 7.15"
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39.ximg exists
[Fri May 31 17:35:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39.csv
[Fri May 31 17:35:24 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri May 31 17:35:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39.csv
[Fri May 31 17:35:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:35:28 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri May 31 17:35:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri May 31 17:35:28 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri May 31 17:35:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri May 31 17:35:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:36:16 2013] Warning, spatial fit 39 centroid is now closest to src. 124
[Fri May 31 17:36:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:36:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:36:17 2013] Assessing source extent using major
[Fri May 31 17:36:17 2013] Source does appear to be extended
[Fri May 31 17:36:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:36:48 2013] XMMSAS src. selection expression = ellipse(27422.461548, 26756.258942, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 17:36:48 2013] Not overwriting source region fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_src.reg
[Fri May 31 17:36:48 2013] Extracting stamp from image fullrun_pn_xmm0147920401_pi300-10000_cl_sm2.00.img.gz, (278, 271) - (353, 346)
[Fri May 31 17:36:48 2013] XMMSAS bgd. selection expression = annulus(27422.461548, 26756.258942, 1087.500000, 2175.000000, X, Y) && !ellipse(27889.632538, 24313.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29358.559357, 24226.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29531.425659, 24913.182739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29998.471863, 24298.745239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.013275, 29789.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27020.184784, 29433.152405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.587341, 29435.857880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27863.830963, 28927.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.375214, 29008.501709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28734.765533, 28751.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29500.635284, 28558.354767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.440857, 28489.762085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.104034, 28322.001404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.856201, 28043.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29296.487427, 27971.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.272583, 27617.720367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.938751, 27621.307312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30041.172699, 27425.286499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29191.032318, 27254.841583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.100128, 27001.551788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29477.342712, 26659.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.070892, 26496.068726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29023.906189, 26390.778229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.825958, 26487.246063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29831.520966, 25964.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28007.441498, 25878.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.238312, 25795.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.760254, 25702.722076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29310.168793, 25446.309967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.799408, 25176.641296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.430176, 25008.291199, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 17:36:48 2013] Writing fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44.gif
[Fri May 31 17:42:50 2013] Mean detx,y = (-2766.55, 2129.82) 
[Fri May 31 17:42:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 17:43:25 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 17:43:27 2013] Setting source spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri May 31 17:43:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri May 31 19:09:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 19:09:43 2013] rmf not generated due to insufficient counts
[Fri May 31 20:02:28 2013] Updating aperture counts using extracted products
[Fri May 31 20:02:28 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 610.00
[Fri May 31 20:02:28 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_bgd.pi.gz = 30.00
[Fri May 31 20:02:28 2013] Got source and background scale factors 1088958.000000, 3499200.000000
[Fri May 31 20:02:28 2013] User source parameters:
  Position = (315.8, 308.1) = 18 46 20.02 -78 29 50.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 600.7 +/- 25.7
  Background aperture counts = 9.3
  Rate = 2 +/- 0.07

[Fri May 31 20:02:28 2013] Updating counts from extracted products
[Fri May 31 20:02:28 2013] Set source signif. to 600.66/3.06 = 196.58
[Fri May 31 20:03:00 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:03:00 2013] Using photon index=1.80, rate=1.59, arf fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44.arf
[Fri May 31 20:03:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:03:00 2013] Updating source flux to 6.1e-12
[Fri May 31 20:03:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:03:27 2013] xmm0147920401/analysis//spectral/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete