[Fri May 31 17:33:02 2013] Detection parameters:
  Position = (296.9, 444.8) = 18 46 47.41 -78 19 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 14.2
  Background counts = 24.3
  Rate = 0.1 +/- 0.02

[Fri May 31 17:33:15 2013] Off-axis axis estimate = 10.61'
[Fri May 31 17:34:02 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:34:02 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Fri May 31 17:34:02 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Fri May 31 17:34:02 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.73"
[Fri May 31 17:34:03 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17.ximg exists
[Fri May 31 17:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17.csv
[Fri May 31 17:34:03 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May 31 17:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17.csv
[Fri May 31 17:34:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:06 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May 31 17:34:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 31 17:34:06 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 31 17:34:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 31 17:34:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:34:54 2013] Spatial fit model total counts = 321.335000, observed total counts = 385.000000
[Fri May 31 17:34:54 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 17:34:55 2013] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.042659 pixels away
[Fri May 31 17:34:55 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:34:55 2013] Assessing source extent using major
[Fri May 31 17:34:55 2013] Source does appear to be extended
[Fri May 31 17:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:34:55 2013] Source is confused with source 17
[Fri May 31 17:35:21 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:35:21 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Fri May 31 17:35:21 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Fri May 31 17:35:21 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 11.73"
[Fri May 31 17:35:23 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16.ximg exists
[Fri May 31 17:35:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16.csv
[Fri May 31 17:35:23 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May 31 17:35:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16.csv
[Fri May 31 17:35:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:35:27 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May 31 17:35:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 31 17:35:27 2013] fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May 31 17:35:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 31 17:35:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147920401_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 17:36:15 2013] Warning, spatial fit 16 centroid is now closest to src. 21
[Fri May 31 17:36:15 2013] Source 18 is offset by 6.466903 and -4.782882 pixels which is larger than
2 X fitted extent = 1.320566 x 1.320566, not incorporating fit results
[Fri May 31 17:36:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 17:36:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 17:36:17 2013] Assessing source extent using major
[Fri May 31 17:36:17 2013] Source does appear to be extended
[Fri May 31 17:36:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:36:46 2013] XMMSAS src. selection expression = ellipse(25782.006561, 38647.503265, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 17:36:46 2013] Not overwriting source region fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src.reg
[Fri May 31 17:36:46 2013] Extracting stamp from image fullrun_pn_xmm0147920401_pi300-10000_cl_sm2.00.img.gz, (259, 407) - (334, 482)
[Fri May 31 17:36:46 2013] XMMSAS bgd. selection expression = annulus(25782.006561, 38647.503265, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.899750, 37619.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26246.453491, 38485.182739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.846741, 38153.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26197.300934, 38057.061920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26015.680000, 36780.310000, 1717.256049, 1717.256049, 0.000000, X, Y) && !ellipse(27051.333588, 36143.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.565521, 35987.047089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.116180, 38839.915894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26744.637878, 38230.371613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27172.875519, 38692.139618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28149.208560, 37408.336000, 1829.120053, 1829.120053, 0.000000, X, Y) && !ellipse(26746.289307, 37529.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.255188, 37280.237518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26387.576263, 36739.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28478.621582, 36418.279602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26555.440491, 36225.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27849.708862, 36065.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.610229, 36560.934326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.417755, 35701.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26647.514252, 35694.863770, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 17:36:46 2013] Writing fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18.gif
[Fri May 31 17:37:08 2013] ../../xmm0147920401/products/events/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0147920401/products/events/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Fri May 31 17:37:08 2013] Mean detx,y = (-2785.34, 13959.85) 
[Fri May 31 17:37:08 2013] ../../xmm0147920401/products/images/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src.img and ../../xmm0147920401/products/images/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Fri May 31 17:37:08 2013] ../../xmm0147920401/products/spectra/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0147920401/products/spectra/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Fri May 31 17:37:08 2013] Setting source spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 31 17:37:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 31 17:37:08 2013] ../../xmm0147920401/products/lightcurves/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0147920401/products/lightcurves/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Fri May 31 18:59:41 2013] Not generating rmf since there are only 95 counts
[Fri May 31 18:59:41 2013] rmf not generated due to insufficient counts
[Fri May 31 20:02:23 2013] Updating aperture counts using extracted products
[Fri May 31 20:02:23 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 333.00
[Fri May 31 20:02:23 2013] Total counts from fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 14.00
[Fri May 31 20:02:23 2013] Got source and background scale factors 739170.000000, 0.000000
[Fri May 31 20:02:23 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May 31 20:02:59 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:02:59 2013] Using photon index=1.80, rate=0.129, arf fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18.arf
[Fri May 31 20:02:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:02:59 2013] Updating source flux to 1.2e-12
[Fri May 31 20:03:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:03:27 2013] xmm0147920401/analysis//spectral/fullrun_pn_xmm0147920401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete