[Fri Jun  1 08:12:30 2012] Detection parameters:
  Position = (277.2, 303.0) = 23 14 15.69 -42 43 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 656.8 +/- 45.5
  Background counts = 506.3
  Rate = 0.007 +/- 0.0005

[Fri Jun  1 08:12:32 2012] Off-axis axis estimate = 1.58'
[Fri Jun  1 08:22:13 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 08:22:13 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Jun  1 08:22:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Fri Jun  1 08:22:13 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 7.22"
[Fri Jun  1 11:55:08 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89.ximg exists
[Fri Jun  1 11:55:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89.csv
[Fri Jun  1 11:55:08 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89_1.ximg exists
[Fri Jun  1 11:55:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89.csv
[Fri Jun  1 11:55:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 11:55:10 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Fri Jun  1 11:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri Jun  1 11:55:10 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Fri Jun  1 11:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri Jun  1 11:55:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 06:11:21 2012] Warning, spatial fit 89 centroid is now closest to src. 97
[Sat Jun  2 06:11:21 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:11:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:11:21 2012] Assessing source extent using major
[Sat Jun  2 06:11:21 2012] Source does appear to be extended
[Sat Jun  2 06:11:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:11:21 2012] Source is confused with source 97
[Sat Jun  2 06:12:06 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:12:06 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sat Jun  2 06:12:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sat Jun  2 06:12:06 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 7.22"
[Sat Jun  2 13:58:41 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80.ximg exists
[Sat Jun  2 13:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80.csv
[Sat Jun  2 13:58:41 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80_1.ximg exists
[Sat Jun  2 13:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80.csv
[Sat Jun  2 13:58:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:58:43 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sat Jun  2 13:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Jun  2 13:58:43 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Jun  2 13:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Jun  2 13:58:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 17:38:52 2012] Warning, spatial fit 80 centroid is now closest to src. 97
[Sat Jun  2 17:38:52 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:38:52 2012] Assessing source extent using major
[Sat Jun  2 17:38:52 2012] Source does appear to be extended
[Sat Jun  2 17:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 17:39:33 2012] XMMSAS src. selection expression = ellipse(24065.646942, 26308.774994, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  2 17:39:33 2012] Writing source region out to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96_src.reg
[Sat Jun  2 17:39:33 2012] Extracting stamp from image fullrun_pn_xmm0147800101_pi300-10000_cl_sm2.00.img.gz, (240, 265) - (315, 340)
[Sat Jun  2 17:39:33 2012] XMMSAS bgd. selection expression = annulus(24065.646942, 26308.774994, 1087.500000, 2175.000000, X, Y) && !ellipse(27890.311400, 26725.930800, 6958.848200, 6958.848200, 0.000000, X, Y) && !ellipse(28393.020782, 27932.662598, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21991.449112, 25112.421448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.943024, 28763.323029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.399719, 28334.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.901489, 27982.085968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23049.997345, 26716.648560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.670532, 27222.641388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.957520, 24679.776459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24543.780000, 24197.078600, 541.742416, 541.742416, 0.000000, X, Y) && !ellipse(21521.035004, 24104.513916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22786.066193, 23864.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.390000, 27817.372000, 1251.080036, 1251.080036, -0.000000, X, Y) && !ellipse(23436.723602, 28150.542267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21459.395844, 27775.129089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23365.842285, 27374.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23796.695129, 25897.832214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22793.178000, 24901.844000, 1199.600035, 1199.600035, 0.000000, X, Y) && !ellipse(23414.631104, 25343.406342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22218.220474, 24632.028412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.695343, 23716.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25430.932037, 23442.264648, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 17:39:33 2012] Writing fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96.gif
[Sat Jun  2 20:09:16 2012] Mean detx,y = (-2863.28, 2020.25) 
[Sat Jun  2 20:09:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 20:09:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 20:09:42 2012] Setting source spectrum file to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Jun  2 20:09:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Tue Jun  5 16:15:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 16:15:04 2012] rmf not generated due to insufficient counts
[Wed Jun  6 06:33:54 2012] Updating aperture counts using extracted products
[Wed Jun  6 06:33:54 2012] Error reading totcts from fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Wed Jun  6 06:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 06:33:58 2012] Using photon index=1.80, rate=0.00718, arf fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src96.arf
[Wed Jun  6 06:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 06:33:58 2012] Updating source flux to 2.2e-14
[Wed Jun  6 06:38:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting