[Fri Jun  1 08:12:30 2012] Detection parameters:
  Position = (269.7, 291.9) = 23 14 18.65 -42 44 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.0 +/- 32.6
  Background counts = 444.6
  Rate = 0.002 +/- 0.0004

[Fri Jun  1 08:12:32 2012] Off-axis axis estimate = 2.14'
[Fri Jun  1 08:22:13 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 08:22:13 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Jun  1 08:22:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Fri Jun  1 08:22:13 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 7.50"
[Fri Jun  1 11:55:08 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93.ximg exists
[Fri Jun  1 11:55:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93.csv
[Fri Jun  1 11:55:08 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93_1.ximg exists
[Fri Jun  1 11:55:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93.csv
[Fri Jun  1 11:55:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 11:55:10 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Fri Jun  1 11:55:11 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Fri Jun  1 11:55:11 2012] Fit fullrun_pn_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sat Jun  2 06:11:21 2012] Spatial fit model total counts = 6264.720000, observed total counts = 5505.000000
[Sat Jun  2 06:11:21 2012] Poor agreement between spatial fit and data for source 100
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  2 06:11:21 2012] Warning, spatial fit 93 centroid is now closest to src. 99
[Sat Jun  2 06:11:21 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:11:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:11:21 2012] Assessing source extent using major
[Sat Jun  2 06:11:21 2012] Source does appear to be extended
[Sat Jun  2 06:11:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:11:21 2012] Source is confused with source 99
[Sat Jun  2 06:12:06 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:12:06 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Sat Jun  2 06:12:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Sat Jun  2 06:12:06 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 7.50"
[Sat Jun  2 13:58:41 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84.ximg exists
[Sat Jun  2 13:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84.csv
[Sat Jun  2 13:58:41 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84_1.ximg exists
[Sat Jun  2 13:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84.csv
[Sat Jun  2 13:58:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:58:43 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Sat Jun  2 13:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Sat Jun  2 13:58:43 2012] fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Sat Jun  2 13:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Sat Jun  2 13:58:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 17:38:52 2012] Warning, spatial fit 84 centroid is now closest to src. 97
[Sat Jun  2 17:38:52 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:38:52 2012] Assessing source extent using major
[Sat Jun  2 17:38:52 2012] Source does appear to be extended
[Sat Jun  2 17:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 17:39:33 2012] XMMSAS src. selection expression = ellipse(23414.631104, 25343.406342, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  2 17:39:33 2012] Writing source region out to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100_src.reg
[Sat Jun  2 17:39:33 2012] Extracting stamp from image fullrun_pn_xmm0147800101_pi300-10000_cl_sm2.00.img.gz, (232, 254) - (307, 329)
[Sat Jun  2 17:39:34 2012] XMMSAS bgd. selection expression = annulus(23414.631104, 25343.406342, 1087.500000, 2175.000000, X, Y) && !ellipse(27890.311400, 26725.930800, 6958.848200, 6958.848200, 0.000000, X, Y) && !ellipse(21991.449112, 25112.421448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.399719, 28334.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.901489, 27982.085968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23049.997345, 26716.648560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.670532, 27222.641388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.957520, 24679.776459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24543.780000, 24197.078600, 541.742416, 541.742416, 0.000000, X, Y) && !ellipse(21521.035004, 24104.513916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22786.066193, 23864.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.390000, 27817.372000, 1251.080036, 1251.080036, -0.000000, X, Y) && !ellipse(23436.723602, 28150.542267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21459.395844, 27775.129089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23365.842285, 27374.710846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24065.646942, 26308.774994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23796.695129, 25897.832214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22793.178000, 24901.844000, 1199.600035, 1199.600035, 0.000000, X, Y) && !ellipse(22218.220474, 24632.028412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.695343, 23716.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25430.932037, 23442.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.087341, 22661.054138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26262.431458, 22418.514557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25601.116760, 22318.759796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25152.966000, 21931.750000, 1269.272037, 1269.272037, 0.000000, X, Y)
[Sat Jun  2 17:39:34 2012] Writing fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100.gif
[Sat Jun  2 20:12:47 2012] Mean detx,y = (-2959.33, 3164.75) 
[Sat Jun  2 20:12:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 20:13:15 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 20:13:15 2012] Setting source spectrum file to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Sat Jun  2 20:13:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Tue Jun  5 16:20:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 16:20:45 2012] rmf not generated due to insufficient counts
[Wed Jun  6 06:33:54 2012] Updating aperture counts using extracted products
[Wed Jun  6 06:33:54 2012] Error reading totcts from fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Wed Jun  6 06:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 06:33:58 2012] Using photon index=1.80, rate=0.00247, arf fullrun_pn_xmm0147800101_pi300-10000_pass1_cl_src100.arf
[Wed Jun  6 06:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 06:33:59 2012] Updating source flux to 7.8e-15
[Wed Jun  6 06:38:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting