[Fri Jun  1 08:13:08 2012] Detection parameters:
  Position = (331.7, 326.3) = 23 13 54.15 -42 42 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1254.2 +/- 59.8
  Background counts = 408.4
  Rate = 0.01 +/- 0.0005

[Fri Jun  1 08:13:09 2012] Off-axis axis estimate = 3.15'
[Fri Jun  1 11:55:11 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:55:11 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun  1 11:55:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.959
[Fri Jun  1 11:55:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.00"
[Sat Jun  2 03:33:45 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  2 03:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5.csv
[Sat Jun  2 03:33:45 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  2 03:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5.csv
[Sat Jun  2 03:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 03:33:47 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  2 03:33:47 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  2 03:33:47 2012] Fit fullrun_mos1_xmm0147800101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun  2 06:11:33 2012] Source 12 is offset by 5.223743 and 6.670787 pixels which is larger than
2 X fitted extent = 5.275265 x 5.275265, not incorporating fit results
[Sat Jun  2 06:11:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:11:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:11:33 2012] Assessing source extent using major
[Sat Jun  2 06:11:33 2012] Source does appear to be extended
[Sat Jun  2 06:11:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:11:33 2012] Source is confused with source 9
[Sat Jun  2 06:11:33 2012] Source is confused with source 14
[Sat Jun  2 13:58:44 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 13:58:44 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sat Jun  2 13:58:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.959
[Sat Jun  2 13:58:44 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.00"
[Sat Jun  2 16:14:35 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  2 16:14:35 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  2 16:14:35 2012] Fit fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun  2 16:14:36 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  2 16:14:36 2012] fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  2 16:14:36 2012] Fit fullrun_mos1_xmm0147800101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  2 17:39:01 2012] Source 12 is offset by 2.496594 and 6.670787 pixels which is larger than
2 X fitted extent = 4.208791 x 4.208791, not incorporating fit results
[Sat Jun  2 17:39:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 17:39:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 17:39:02 2012] Assessing source extent using major
[Sat Jun  2 17:39:02 2012] Source does appear to be extended
[Sat Jun  2 17:39:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 16:52:05 2012] Counts = 1254.175781, rescaling region sizes by 2.000000
[Tue Jun  5 16:52:05 2012] XMMSAS src. selection expression = ellipse(28813.221649, 28340.618469, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun  5 16:52:05 2012] Writing source region out to fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun  5 16:52:05 2012] Extracting stamp from image fullrun_mos1_xmm0147800101_pi300-10000_cl_sm2.00.img.gz, (257, 251) - (407, 401)
[Tue Jun  5 16:52:05 2012] XMMSAS bgd. selection expression = annulus(28813.221649, 28340.618469, 4350.000000, 8700.000000, X, Y) && !ellipse(27863.372600, 26714.848200, 5913.384170, 5913.384170, 0.000000, X, Y) && !ellipse(21984.223400, 25068.335800, 391.500011, 391.500011, 0.000000, X, Y) && !ellipse(28285.622192, 28594.954346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28805.962000, 27493.272000, 1292.456037, 1292.456037, 0.000000, X, Y) && !ellipse(21783.305435, 22529.282379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.068000, 27959.900000, 1953.688056, 1953.688056, 0.000000, X, Y) && !ellipse(23866.371000, 28755.208600, 355.767210, 355.767210, 0.000000, X, Y) && !ellipse(30213.885010, 27539.253632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.702000, 29576.748000, 2526.512073, 2526.512073, 0.000000, X, Y) && !ellipse(30803.678528, 25801.059052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24880.459503, 33708.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.107819, 36825.367279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22767.774000, 23839.118200, 453.892813, 453.892813, 0.000000, X, Y) && !ellipse(31097.038025, 27095.983215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.788788, 25789.124695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.180420, 23715.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25681.092000, 28393.526000, 1231.952035, 1231.952035, 0.000000, X, Y) && !ellipse(30846.370000, 23708.482000, 1362.480039, 1362.480039, 0.000000, X, Y) && !ellipse(24562.886139, 26409.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.186523, 22962.978760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26028.621613, 23978.155762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29404.948000, 23321.400000, 1284.200037, 1284.200037, 0.000000, X, Y) && !ellipse(35394.277283, 36383.881042, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 16:52:05 2012] Writing fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12.gif
[Tue Jun  5 17:03:56 2012] Mean detx,y = (1604.65, -58.52) 
[Tue Jun  5 17:04:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 17:07:00 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 17:07:00 2012] Setting source spectrum file to fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun  5 17:07:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun  5 22:46:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 22:46:23 2012] rmf not generated due to insufficient counts
[Wed Jun  6 06:34:00 2012] Updating aperture counts using extracted products
[Wed Jun  6 06:34:00 2012] Error reading totcts from fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jun  6 06:34:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 06:34:01 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0147800101_pi300-10000_pass1_cl_src12.arf
[Wed Jun  6 06:34:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 06:34:01 2012] Updating source flux to 1.1e-13
[Wed Jun  6 06:34:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting