[Thu Oct  6 08:50:46 2011] Detection parameters:
  Position = (212.0, 341.0) = 10 2 45.68 55 46 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 16.5
  Background counts = 46.4
  Rate = 0.004 +/- 0.0006

[Thu Oct  6 08:50:47 2011] Off-axis axis estimate = 6.99'
[Thu Oct  6 11:05:54 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:05:54 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Oct  6 11:05:54 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Oct  6 11:05:54 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 9.92"
[Thu Oct  6 11:59:47 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Oct  6 11:59:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 11:59:47 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Oct  6 11:59:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 11:59:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:59:48 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct  6 11:59:48 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct  6 11:59:48 2011] Fit fullrun_mos2_xmm0147760101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct  6 12:00:12 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.629208 pixels away
[Thu Oct  6 12:00:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 12:00:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 12:00:13 2011] Assessing source extent using major
[Thu Oct  6 12:00:13 2011] Source does appear to be extended
[Thu Oct  6 12:00:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 14:13:53 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 14:13:53 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Oct  6 14:13:53 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Oct  6 14:13:53 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 9.92"
[Thu Oct  6 15:02:22 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Oct  6 15:02:22 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Oct  6 15:02:22 2011] Fit fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Oct  6 15:02:22 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Oct  6 15:02:22 2011] fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Oct  6 15:02:22 2011] Fit fullrun_mos2_xmm0147760101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Oct  6 15:02:44 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.564592 pixels away
[Thu Oct  6 15:02:44 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 15:02:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 15:02:44 2011] Assessing source extent using major
[Thu Oct  6 15:02:44 2011] Source does appear to be extended
[Thu Oct  6 15:02:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 18:47:48 2011] XMMSAS src. selection expression = ellipse(18394.849518, 29617.095490, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Oct  6 18:47:48 2011] Writing source region out to fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15_src.reg
[Thu Oct  6 18:47:48 2011] Extracting stamp from image fullrun_mos2_xmm0147760101_pi300-10000_cl_sm2.00.img.gz, (174, 303) - (249, 378)
[Thu Oct  6 18:47:48 2011] XMMSAS bgd. selection expression = annulus(18394.849518, 29617.095490, 1087.500000, 2175.000000, X, Y) && !ellipse(15485.714005, 30989.076569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16919.497700, 31433.258800, 415.263212, 415.263212, 0.000000, X, Y)
[Thu Oct  6 18:47:48 2011] Writing fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15.gif
[Thu Oct  6 18:51:45 2011] Mean detx,y = (-2181.09, -9305.72) 
[Thu Oct  6 18:51:47 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 18:52:00 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 18:52:00 2011] Setting source spectrum file to fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Oct  6 18:52:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Oct  6 19:12:58 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Oct  6 19:12:58 2011] rmf not generated due to insufficient counts
[Thu Oct  6 19:18:51 2011] Updating aperture counts using extracted products
[Thu Oct  6 19:18:51 2011] Error reading totcts from fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Oct  6 19:18:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 19:18:51 2011] Using photon index=1.80, rate=0.00441, arf fullrun_mos2_xmm0147760101_pi300-10000_pass1_cl_src15.arf
[Thu Oct  6 19:18:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 19:18:51 2011] Updating source flux to 6.8e-14
[Thu Oct  6 19:20:07 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting