[Fri Sep  7 08:18:13 2012] Detection parameters:
  Position = (338.1, 135.3) = 8 51 43.35 -46 31 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.9 +/- 14.5
  Background counts = 20.0
  Rate = 0.006 +/- 0.0009

[Fri Sep  7 08:18:13 2012] Off-axis axis estimate = 12.17'
[Fri Sep  7 08:28:44 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 08:28:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 08:28:44 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Sep  7 08:28:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.987
[Fri Sep  7 08:28:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.51"
[Fri Sep  7 08:32:22 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Sep  7 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3.csv
[Fri Sep  7 08:32:22 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Sep  7 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3.csv
[Fri Sep  7 08:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 08:32:22 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep  7 08:32:22 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep  7 08:32:22 2012] Fit fullrun_mos2_xmm0147750201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep  7 08:32:24 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.466686 pixels away
[Fri Sep  7 08:32:24 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 08:32:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 08:32:24 2012] Assessing source extent using major
[Fri Sep  7 08:32:24 2012] Source does appear to be extended
[Fri Sep  7 08:32:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 08:38:37 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 08:38:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 08:38:37 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Sep  7 08:38:37 2012] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.987
[Fri Sep  7 08:38:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.51"
[Fri Sep  7 08:42:47 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Sep  7 08:42:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3.csv
[Fri Sep  7 08:42:47 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Sep  7 08:42:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3.csv
[Fri Sep  7 08:42:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 08:42:47 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep  7 08:42:47 2012] fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep  7 08:42:47 2012] Fit fullrun_mos2_xmm0147750201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep  7 08:42:50 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.468135 pixels away
[Fri Sep  7 08:42:50 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 08:42:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 08:42:50 2012] Assessing source extent using major
[Fri Sep  7 08:42:50 2012] Source does appear to be extended
[Fri Sep  7 08:42:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 08:46:11 2012] XMMSAS src. selection expression = ellipse(29370.321136, 11725.153076, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep  7 08:46:11 2012] Writing source region out to fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5_src.reg
[Fri Sep  7 08:46:11 2012] Extracting stamp from image fullrun_mos2_xmm0147750201_pi300-10000_cl_sm2.00.img.gz, (301, 98) - (376, 173)
[Fri Sep  7 08:46:11 2012] XMMSAS bgd. selection expression = annulus(29370.321136, 11725.153076, 1087.500000, 2175.000000, X, Y)
[Fri Sep  7 08:46:11 2012] Writing fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5.gif
[Fri Sep  7 08:46:31 2012] Mean detx,y = (7754.44, -14645.72) 
[Fri Sep  7 08:46:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 08:46:40 2012] grppha failed
[Fri Sep  7 08:46:40 2012] Setting source spectrum file to fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5_src.pi.gz
[Fri Sep  7 08:46:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Sep  7 08:47:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 08:47:11 2012] rmf not generated due to insufficient counts
[Fri Sep  7 08:47:22 2012] Updating aperture counts using extracted products
[Fri Sep  7 08:47:22 2012] Error reading totcts from fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5_src.pi.gz
[Fri Sep  7 08:47:22 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 08:47:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 08:47:24 2012] xmm0147750201/analysis//spectral/fullrun_mos2_xmm0147750201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete