[Fri Jun 15 22:40:13 2012] Detection parameters:
  Position = (438.0, 337.3) = 8 51 1.41 -46 16 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.4 +/- 22.9
  Background counts = 114.4
  Rate = 0.009 +/- 0.001

[Fri Jun 15 22:40:13 2012] Off-axis axis estimate = 10.50'
[Fri Jun 15 23:02:16 2012] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:02:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 23:02:16 2012] Initial guess for spatial extent in simple fitting = 11.68"
[Fri Jun 15 23:02:16 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.887
[Fri Jun 15 23:02:16 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.68"
[Fri Jun 15 23:12:48 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 15 23:12:48 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 15 23:12:48 2012] Fit fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Jun 15 23:12:48 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 15 23:12:48 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 15 23:12:48 2012] Fit fullrun_mos1_xmm0147750101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 15 23:31:08 2012] Spatial fit model total counts = 1369.000000, observed total counts = 1369.000000
[Fri Jun 15 23:31:08 2012] Offset between fit and detection position for source 8 = 0.206056 pixels
[Fri Jun 15 23:31:08 2012] 1358.140000 total counts/ 1239.170000 bgd. counts: snr = 3.379652
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.206056 pixels
  Position = (437.8, 337.4) = 8 51 1.48 -46 16 43.4
  Extent = 4.5 (3.6-5.9)", rotation angle = 0
  Source counts = 119.0 +/- 36.9
  Background counts = 1239.2
  Rate = 0.003 +/- 0.0009
[Fri Jun 15 23:31:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:31:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:31:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:31:08 2012] Source does appear to be extended
[Fri Jun 15 23:31:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:35:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:35:04 2012] Initial guess for spatial extent in simple fitting = 4.52"
[Fri Jun 15 23:35:04 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.949
[Fri Jun 15 23:35:04 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.52"
[Fri Jun 15 23:50:42 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 15 23:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 23:50:42 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 15 23:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 23:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:50:42 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 15 23:50:42 2012] fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 15 23:50:42 2012] Fit fullrun_mos1_xmm0147750101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 16 00:02:01 2012] Spatial fit model total counts = 1241.990000, observed total counts = 1242.000000
[Sat Jun 16 00:02:01 2012] Offset between fit and detection position for source 8 = 0.006450 pixels
[Sat Jun 16 00:02:01 2012] 1233.539000 total counts/ 1114.660000 bgd. counts: snr = 3.560688
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.006450 pixels
  Position = (437.8, 337.4) = 8 51 1.49 -46 16 43.4
  Extent = 4.6 (3.6-5.8)", rotation angle = 0
  Source counts = 118.9 +/- 35.1
  Background counts = 1114.7
  Rate = 0.003 +/- 0.0009
[Sat Jun 16 00:02:01 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:02:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:02:01 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 00:02:01 2012] Source does appear to be extended
[Sat Jun 16 00:02:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:45:35 2012] XMMSAS src. selection expression = ellipse(38037.738600, 29302.982600, 273.851408, 273.851408, 0.000000, X, Y)
[Sat Jun 16 00:45:35 2012] Writing source region out to fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun 16 00:45:35 2012] Extracting stamp from image fullrun_mos1_xmm0147750101_pi300-10000_cl_sm2.00.img.gz, (422, 322) - (454, 353)
[Sat Jun 16 00:45:35 2012] XMMSAS bgd. selection expression = annulus(38037.738600, 29302.982600, 456.419013, 912.838026, X, Y)
[Sat Jun 16 00:45:35 2012] Writing fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8.gif
[Sat Jun 16 00:46:03 2012] Mean detx,y = (-6907.73, 9948.51) 
[Sat Jun 16 00:46:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 00:46:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 00:46:11 2012] Setting source spectrum file to fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 16 00:46:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun 16 01:22:07 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:22:07 2012] Error reading totcts from fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 16 01:22:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:22:07 2012] Using photon index=1.80, rate=0.00291, arf fullrun_mos1_xmm0147750101_pi300-10000_pass1_cl_src8.arf
[Sat Jun 16 01:22:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:22:07 2012] Updating source flux to 7.2e-14