[Sun Aug 19 02:37:21 2012] Detection parameters:
  Position = (260.7, 274.2) = 9 14 2.15 40 53 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.2 +/- 7.1
  Background counts = 4.4
  Rate = 0.002 +/- 0.0006

[Sun Aug 19 02:37:21 2012] Off-axis axis estimate = 3.25'
[Sun Aug 19 03:54:33 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 03:54:33 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun Aug 19 03:54:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.130
[Sun Aug 19 03:54:33 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.05"
[Sun Aug 19 04:38:46 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23.ximg exists
[Sun Aug 19 04:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23.csv
[Sun Aug 19 04:38:46 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Aug 19 04:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23.csv
[Sun Aug 19 04:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 04:38:47 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Aug 19 04:38:47 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Aug 19 04:38:47 2012] Fit fullrun_mos2_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Aug 19 04:39:02 2012] Spatial fit model total counts = 70.896300, observed total counts = 71.000000
[Sun Aug 19 04:39:02 2012] Offset between fit and detection position for source 26 = 0.495509 pixels
[Sun Aug 19 04:39:02 2012] 67.709600 total counts/ 48.000900 bgd. counts: snr = 2.844679
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.495509 pixels
  Position = (261.0, 274.6) = 9 14 2.05 40 53 5.2
  Extent = 6.1 (4.3-9.6)", rotation angle = 0
  Source counts = 19.7 +/- 8.2
  Background counts = 48.0
  Rate = 0.001 +/- 0.0006
[Sun Aug 19 04:39:02 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 04:39:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 04:39:02 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 04:39:02 2012] Source does appear to be extended
[Sun Aug 19 04:39:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 05:48:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:48:09 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Sun Aug 19 05:48:09 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.095
[Sun Aug 19 05:48:09 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.14"
[Sun Aug 19 06:29:03 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20.ximg exists
[Sun Aug 19 06:29:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20.csv
[Sun Aug 19 06:29:03 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Aug 19 06:29:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20.csv
[Sun Aug 19 06:29:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 06:29:04 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Aug 19 06:29:04 2012] fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Aug 19 06:29:04 2012] Fit fullrun_mos2_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Aug 19 06:29:18 2012] Warning, spatial fit 20 centroid is now closest to src. 25
[Sun Aug 19 06:29:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 06:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 06:29:18 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 06:29:18 2012] Source does appear to be extended
[Sun Aug 19 06:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 07:49:07 2012] XMMSAS src. selection expression = ellipse(22657.493192, 23843.351000, 368.417411, 368.417411, 0.000000, X, Y)
[Sun Aug 19 07:49:07 2012] Writing source region out to fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26_src.reg
[Sun Aug 19 07:49:07 2012] Extracting stamp from image fullrun_mos2_xmm0147671001_pi300-10000_cl_sm2.00.img.gz, (240, 253) - (282, 296)
[Sun Aug 19 07:49:07 2012] XMMSAS bgd. selection expression = annulus(22657.493192, 23843.351000, 614.029018, 1228.058035, X, Y)
[Sun Aug 19 07:49:07 2012] Writing fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26.gif
[Sun Aug 19 07:53:25 2012] Mean detx,y = (4963.62, -2524.31) 
[Sun Aug 19 07:53:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 07:53:33 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 07:53:33 2012] Setting source spectrum file to fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Aug 19 07:53:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Aug 19 08:03:08 2012] Not generating rmf since there are only 19 counts
[Sun Aug 19 08:03:08 2012] rmf not generated due to insufficient counts
[Sun Aug 19 08:03:45 2012] Updating aperture counts using extracted products
[Sun Aug 19 08:03:45 2012] Error reading totcts from fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Aug 19 08:03:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 08:03:46 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0147671001_pi300-10000_pass1_cl_src26.arf
[Sun Aug 19 08:03:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 08:03:46 2012] Updating source flux to 2.1e-14
[Sun Aug 19 08:04:04 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting