[Sun Aug 19 02:36:57 2012] Detection parameters:
  Position = (354.3, 361.4) = 9 13 26.22 40 59 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.2 +/- 13.2
  Background counts = 4.9
  Rate = 0.01 +/- 0.001

[Sun Aug 19 02:36:57 2012] Off-axis axis estimate = 6.10'
[Sun Aug 19 03:14:17 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 03:14:17 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Aug 19 03:14:17 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.731
[Sun Aug 19 03:14:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.48"
[Sun Aug 19 03:54:33 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 19 03:54:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2.csv
[Sun Aug 19 03:54:33 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 19 03:54:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2.csv
[Sun Aug 19 03:54:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 03:54:33 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 19 03:54:33 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 19 03:54:33 2012] Fit fullrun_mos1_xmm0147671001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 19 04:38:57 2012] Spatial fit model total counts = 148.670000, observed total counts = 152.000000
[Sun Aug 19 04:38:57 2012] Offset between fit and detection position for source 2 = 0.190454 pixels
[Sun Aug 19 04:38:57 2012] 147.779600 total counts/ 76.927100 bgd. counts: snr = 8.078217
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.190454 pixels
  Position = (354.2, 361.3) = 9 13 26.28 40 59 22.3
  Extent = 4.3 (3.5-5.4)", rotation angle = 0
  Source counts = 70.9 +/- 12.2
  Background counts = 76.9
  Rate = 0.005 +/- 0.0009
[Sun Aug 19 04:38:57 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 04:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 04:38:57 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 04:38:57 2012] Source does appear to be extended
[Sun Aug 19 04:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 05:13:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:13:40 2012] Initial guess for spatial extent in simple fitting = 4.34"
[Sun Aug 19 05:13:40 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.003
[Sun Aug 19 05:13:40 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.34"
[Sun Aug 19 05:48:08 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 19 05:48:08 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 19 05:48:08 2012] Fit fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Aug 19 05:48:09 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 19 05:48:09 2012] fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 19 05:48:09 2012] Fit fullrun_mos1_xmm0147671001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug 19 06:29:13 2012] Warning, spatial fit 2 centroid is now closest to src. 11
[Sun Aug 19 06:29:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 06:29:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 06:29:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 06:29:14 2012] Source does appear to be extended
[Sun Aug 19 06:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 07:31:13 2012] XMMSAS src. selection expression = ellipse(30762.883980, 31385.526200, 260.346607, 260.346607, 0.000000, X, Y)
[Sun Aug 19 07:31:13 2012] Writing source region out to fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 19 07:31:13 2012] Extracting stamp from image fullrun_mos1_xmm0147671001_pi300-10000_cl_sm2.00.img.gz, (339, 346) - (369, 376)
[Sun Aug 19 07:31:13 2012] XMMSAS bgd. selection expression = annulus(30762.883980, 31385.526200, 433.911012, 867.822025, X, Y)
[Sun Aug 19 07:31:13 2012] Writing fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2.gif
[Sun Aug 19 07:33:27 2012] Mean detx,y = (2108.98, 5030.83) 
[Sun Aug 19 07:33:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 07:33:34 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 07:33:34 2012] Setting source spectrum file to fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 19 07:33:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 19 07:40:54 2012] Not generating rmf since there are only 70 counts
[Sun Aug 19 07:40:54 2012] rmf not generated due to insufficient counts
[Sun Aug 19 08:03:45 2012] Updating aperture counts using extracted products
[Sun Aug 19 08:03:45 2012] Error reading totcts from fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 19 08:03:45 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 08:03:45 2012] Using photon index=1.80, rate=0.00519, arf fullrun_mos1_xmm0147671001_pi300-10000_pass1_cl_src2.arf
[Sun Aug 19 08:03:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 08:03:45 2012] Updating source flux to 8.6e-14
[Sun Aug 19 08:03:47 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting